ZyXEL Communications VSG-1200 28.3.1 Backup Configuration Using HTTP

VSG-1200 User’s Guide

Figure 156 SMT: Firmware Upgrade

Firmware Upgrade

TFTP Server IP Address	:172.21.4.72
Download Filename	:VSG1200V108.bin

E)xecute Download	R)eturn to Main Menu M)odify
Enter Selection:

Enter the command key and press enter.

6Type E at the “Enter Selection:” prompt to get the firmware file from the TFTP server.

Figure 157 SMT: Firmware Upgrade Process

Firmware Upgrade

TFTP Server IP Address	:172.21.4.72
Download Filename	:VSG1200V108.bin

---------+---------+---------+---------+---------

****************************

7When the file transfer is complete, the VSG automatically reboots. Wait until the VSG finishes rebooting before accessing the VSG again.

28.3Configuration File Maintenance

You can only use the web configurator to perform configuration file backup and restore.

Warning: DO NOT INTERRUPT THE FILE TRANSFER PROCESS AS THIS MAY PERMANENTLY DAMAGE YOUR DEVICE.

28.3.1 Backup Configuration Using HTTP

Backup is highly recommended once your VSG is functioning properly.

220	Chapter 28 Configuration and Firmware Maintenance

Contents

User’s Guide Copyright Disclaimer Trademarks Federal Communications Commission (FCC) Interference Statement Notice Certifications ZyXEL Limited Warranty Note Registration Safety Warnings Customer Support Page Page Table of Contents Chapter NAT Pool Page Dynamic Subscriber Accounts Port-LocationMapping Credit Card Billing and Customization Account Printout Bandwidth Management Passthrough LAN Devices Static Route Page The SMT LAN and WAN Setup Using the SMT Configuration and Firmware Maintenance Troubleshooting Page List of Figures Page Page Page Page Page List of Tables Page Page Page Preface About This User's Guide Related Documentation User Guide Feedback Syntax Conventions Graphics Icons Key Getting to Know Your VSG Automatic Account Billing with Property Management System (PMS) CAS (Central Authentication Service) Credit Card Billing SSL Secure Login PPPoE Support (RFC2516) PPTP Support 4-PortSwitch Reset Button DHCP Support RADIUS (Remote Authentication Dial-InUser Service) Client Built-inAuthentication and Local Subscriber Database Accounting Local Content and Advertising Links NAT (Network Address Translation) MAC (Media Access Control) Filter Static Route Subscriber Login Page Customization Dual-functionConsole Port 1.3.1 Internet Access for LAN Networks 1.3.2 Internet Access in Public Areas 1.3.3 Hotel Application with PMS Hardware Installation and Connection 2.2.1 Front Panel 2.2.1.1 Four LAN 10/100M Ports 2.2.1.2 The WAN Port 2.2.1.3 The Console Port 2.2.1.4 The PMS Port 2.2.1.5 The Reset Button 2.2.4 Turning on the VSG PWR 2.2.5 Methods of Restoring Factory Defaults RESET Page The Web Configurator Page Configuration Menu 3.3.1 The Configuration Menu Panel 3.3.2 Screen Specific Link Panel System Domain Name Page Page Page Advanced Setting Portal Page Advertisement Walled Garden From the Main Menu screen, click System Tools and System Account System Tools Keep subscriber profile Keep port-location mapping profile In the Main Menu screen, click System Tools, Restart and click Apply Main Menu Logout Page LAN, WAN and Server Setup 4.4.1 IP Address and Subnet Mask 4.4.2 Private IP Addresses System Setting WAN/LAN WAN Port Mode 4.7.1 Configuring WAN MAC Address WAN/LAN 4.7.2 MTU 4.7.3 WAN IP Address Settings 4.7.4 PPPoE Page 4.7.5 PPTP Server Configuration Server Page Page Page NAT Pool 5.1.2 What NAT Does 5.1.3 How NAT Works 5.3.1 Example 1: One-to-One 5.3.2 Example 2: Many-to-One 5.3.3 Example 3: One-to-Oneand Many-to-One NAT Pool Page Authentication 6.1.5.1 RADIUS Accounting 6.1.5.2 Vendor Specific Attribute Page the Billing and Accounting screens RADIUS 6.2.1 Scenario Options Select option Items Check Page Billing Profiles and PMS Configuration 7.1.2 Editing a Billing Profile Edit Page 7.2.1 Port-LocationMapping Charge Modes Based on Room Based on Subscriber 7.2.2 PMS Configuration PMS Configuration Page Static Subscriber Accounts Page 8.3.1 Generating Static Accounts Automatically Generate a batch of static accounts Create Static Subscriber Account Static Account List 8.3.2 Creating Static Subscriber Accounts Manually Manually Add Static Subscriber Accounts Create Static Account 8.4.1 Backing Up a Static Account List File Download Save Save As 8.4.2 Restoring a Static Account List File Path Browse Static Account Operator 8.5.1 Static Account Information Print Preview Print Page Dynamic Subscriber Accounts Page 9.3.1 Dynamic Account Generation Using the Web Configurator 9.3.2 Dynamic Account Generation Using a Statement Printer Console Type Dynamic Account Operator Panel Dynamic Account List 9.4.1 Backing Up the Dynamic Account List 2Click Dynamic Account List (refer to Figure 54 on page 99) Page Page Port-LocationMapping Page Page Page Credit Card Billing and Customization Advanced Setting Advanced Customization Credit Card Customization 11.3.1 Subscriber Standard Login Page Message Credit Card Message Preview of Standard Login Page 11.3.2 Service Selection Page Page Page 11.3.3 Successful Screen Page 11.3.4 Fail Page Fail Page Page Subscriber Login Screen 12.2.1 Standard Subscriber Login Screen In the Login Screen Configuration screen, select Standard 12.2.2 Redirect Subscriber Login Screen In the Login Screen Configuration screen, select Redirect 12.2.3 Advanced Subscriber Login Screen 12.2.4 Frame Subscriber Login Screen 12.2.5 Service Selection Messages Page Subscriber Information Window Page Page Page Account Printout Page Page Page Page Page Page Page User Agreement Page Page Page Page Bandwidth Management 16.1.2 Configuring Equal Share Bandwidth Management Equal bandwidth for all subscribers 16.1.3 Configuring Class of Service Bandwidth Management Class of service based on RADIUS or Billing profile settings Page Portal Page, Advertisement Link and Walled Garden Advertisement Walled Garden Page Passthrough Page 18.2.2 Destination URL and IP Address Passthrough Page LAN Devices Page 19.2.1 LAN Device Management Example 19.2.2Specifying an Inside Server Example LAN Device Management Page Page Static Route Page Page Page Syslog and Session Trace 21.1.2 Configure Log Settings Log Settings Page Page 21.2.1 Configuring Session Trace Session Trace 21.2.1.1 Session Trace Filename Convention Page Page SNMP 22.1.1Network Management System (NMS) SNMP Table 55 SNMP Page MAC Filter Page System Status Page Page Page DHCP DHCP Clients System Status NAT Pool Table LAN Devices Status LAN Devices 24.7.1 Accessing the LAN Device LAN Device Status Billing Log 24.8.1 Billing Logs Backup Save this file to disk PMS Transaction Static Route Table Static Routing Table Page Secure Socket Layer Servers SSL Security Web Server Page Page Security Alert View Certificate Certificate Install Certificate Certificate Import Wizard Finish Root Certificate Store Yes Page Page Page The SMT Page Page 26.4.1 The Navigation Keys System Configuration Utilities Change Administrator Password Enter the old password Enter the new password Confirm the new password Page Page LAN and WAN Setup Using the SMT 27.2.2 PPPoE Support 27.2.3 PPTP Support Page LAN Configuration Page Page Page Configuration and Firmware Maintenance 28.2.1.1 Manual Firmware Upgrade 28.2.1.2Manual Firmware Upgrade via a TFTP Server 28.2.1.3Scheduled Firmware Upgrade Page 28.2.2 Firmware Upgrade Using SMT Utilities Menu 28.3.1 Backup Configuration Using HTTP Page 28.3.2Backup Configuration Using TFTP Text File Name 28.3.3 Restore Configuration Using HTTP Restore 28.3.4Restore Configuration Using TFTP Page Page Troubleshooting 29.1.3 The WAN Port LEDs Page Page Appendix A Product Specifications Page Appendix B IP Address Assignment Conflicts Page Page Page Appendix C Subscriber Login Page Appendix D Vendor Specific Attributes BW-Down BW-Up Page Page Appendix E Report Printing Using the SP-200 Page Page Page Page Page Appendix F Cable Types and Cable Pin Assignments Page Page Page Appendix G Setting up Your Computer’s IP Address Installing Components Add Adapter Protocol Microsoft Client for Microsoft Networks Configuring Properties Obtain an IP address automatically Specify an IP address New gateway field TCP/IP Properties Verifying Settings Run IP Configuration Network Connections Network and Dial-up Connections 3Right-click Local Area Connection and then click Properties Internet Protocol (TCP/IP) General Use the following IP Address IP address Subnet mask Default gateway IP Settin Use the following DNS server addresses Preferred DNS server Alternate DNS server 8Click OK to close the Internet Protocol (TCP/IP) Properties window 9Click OK to close the Local Area Connection Properties window 2Select Ethernet built-in from the Connect via list Using DHCP Server Configure: Configure Manually Router address 5Close the TCP/IP Control Panel System Preferences Apply Now Page Appendix H IP Subnetting Page Page Page Page Table 106 Subnet Page Page Index