VSG-1200 User’s Guide

Table 71 SMT: WAN Configuration: PPTP (continued)

FIELDDESCRIPTION

TCP MSS Setting Enter the size of the Maximum Segment Size (MSS).

At the “S)ave and return R)eturn without saving M)odify:” prompt, type S and press [ENTER] to save the changes and return to the previous screen, type R and press [ENTER] to discard all changes and return to the previous screen or type M and press [ENTER] to continue configuring the fields. Restart the device when prompted

Press [ESC] and enter Y to stop any actions in the current screen and return to the previous screen. All changes will be discarded.

27.3 LAN Configuration

From the Main Menu screen, enter 3 to display the LAN Configuration menu as shown next.

Figure 146 SMT: LAN Configuration

DHCP Configuration

LAN Configuration

:S

DHCP Service? (D/R/S)

Start IP Address(Private)

:10.59.1.2

DHCP Pool Size

(Private)

:20

Lease Time

(Private)

:1440

Primary DNS IP Address

:168.95.1.1

Secondary DNS IP Address

:

 

 

 

The following table describes the fields in this menu.

Table 72 SMT: LAN Configuration

FIELD

DESCRIPTION

 

 

DHCP Service?

Enter D (Disable) to deactivate DHCP services on the LAN. Ethernet devices

(D/R/S)

connected to the LAN interface must use static IP addresses.

 

Enter R (Relay) to set the VSG to forward network configuration requests to a

 

DHCP server on the LAN network. Then configure the Server IP Address and

 

Agent IP Address fields.

 

Enter S (Server) to set the VSG to assign network information (IP address, DNS

 

information etc.) to Ethernet device(s) connected to the LAN port. This is the

 

default setting.

Start IP Address

This field is visible when you enter S in the DHCP Service field.

 

Enter the first of the continuous addresses in the IP address pool. The default is

 

10.59.1.2.

DHCP Pool Size

This field is visible when you enter S in the DHCP Service field.

 

This field specifies the size or count of the IP address pool. Enter a number not

 

greater than 1024. The default is 253.

Lease Time

This field is visible when you enter S in the DHCP Service field.

 

Specify the time (in minutes between 1 and 71582788) a DHCP client is allowed to

 

use an assigned IP address. When the lease time expires, the DHCP client is

 

given a new, unused IP address. The default is 1440 minutes.

Chapter 27 LAN and WAN Setup Using the SMT

211