|
| |
| Table 10 System Setting: Server (continued) | |
|
|
|
| LABEL | DESCRIPTION |
|
|
|
| DHCP Server | Select the DHCP mode on the LAN. |
|
|
|
| Disable | Select this option to disable DHCP server on the LAN. |
|
|
|
| DHCP Relay | Select this option to set the VSG to forward client DHCP requests to a |
|
| DHCP server on the LAN network. Then configure the DHCP Server IP |
|
| Address field. |
| DHCP Server IP Address | If you select DHCP Relay, enter the IP address of the real DHCP server. |
|
|
|
| DHCP Server | Select this option to set the VSG to assign network information (IP |
|
| address, DNS information etc.) to Ethernet device(s) connected to the |
|
| LAN port(s). This is the default setting. |
| DHCP Pool Start IP Address | Enter the first of the continuous addresses in the IP address pool. The |
|
| default is 10.59.1.2 (based on the default LAN IP address of 10.59.1.1). |
| DHCP Pool Size | This field specifies the size or count of the IP address pool. Enter a |
|
| number not greater than 1024. The default is 253. |
| Lease Time | Specify the time (in minutes between 1 and 71582788) a DHCP client is |
|
| allowed to use an assigned IP address. When the lease time expires, the |
|
| DHCP client is given a new, unused IP address. |
| Primary/Secondary DNS IP | Enter the IP address of the DNS server(s) in the Primary DNS IP |
| Address | Address and/or Secondary DNS IP Address fields. |
|
| Note: You must specify a DNS server. |
|
|
|
| You can set the VSG to redirect and send subscriber's | |
|
| specified |
|
| via the local |
|
| or prevented by relay restrictions. |
| IP Address or Domain Name | Specify the IP address or the domain name of the |
|
| the VSG forwards |
| SMTP Port | Specify the port number (25 is the default) for SMTP (Simple Mail |
|
| Transfer Protocol). Enter a number between 2500 and 2599. |
| Apply | Click Apply to save the settings. |
|
|
|
Chapter 4 LAN, WAN and Server Setup | 63 |