ZyXEL Communications VSG-1200 manual 213

VSG-1200 User’s Guide

The following table describes the fields in this screen.

Table 73 SMT: System Status

FIELD	DESCRIPTION
System Name	This field displays the name of the VSG for identification purposes.
Domain Name	This field displays the domain name.
Console Port	This field displays the console port speed (1200, 2400, 4800, 9600, 14400, 19200,
Speed	38400, 57600, or 115200).
Web Server Port	This field displays the port number for the embedded web server.
	If the port number is not 80, then you need to append the port number to the WAN
	port IP address to access the VSG web configurator. For example, if 8010 is the
	web server port number, then you must enter “http://www.192.168.1.1:8010” in the
	address bar on the web browser where 192.168.1.1 is the WAN or LAN port IP
	address.
E-mail Server IP	This field displays the IP address of the e-mail server to which the VSG forwards
Address	the e-mail when the subscriber’s e-mail server(s) is behind a NAT-enabled network
	or firewall.
WAN
Configuration
WAN Type? (D/S/	This field displays the WAN IP address assignment method (Static IP Setting or
P/T)	DHCP Client).
IP Address	This field displays the WAN IP address of the VSG.
Subnet Mask	This field displays the subnet mask on the WAN port.
Gateway	This field displays the IP address of the default gateway.
Primary DNS	This field displays the IP address of the primary DNS server.
Server
Secondary DNS	This field displays the IP address of the secondary DNS server.
Server
DHCP
Configuration
DHCP Service?	This field displays the DHCP mode (Server, Relay or Disable) on the LAN port.
(D/R/S)
Start IP Address	This field is visible when the DHCP Service field is Server.
	This field displays the first of the contiguous addresses in the IP address pool.
DHCP Pool Size	This field is visible when the DHCP Service field is Server.
	This field displays the size of the DHCP client pool.
Lease Time	This field is visible when the DHCP Service field is Server.
	This field displays for how many minutes a DHCP client is allowed to use an
	assigned IP address.
Agent Server IP	This field is visible when the DHCP Service field displays Relay.
Address	This field displays the IP address of the DHCP relay agent.
Primary/	These fields are visible when the DHCP Service field is Server.
Secondary DNS IP	These two fields display the IP address(es) of the DNS server(s).
Address

Press any key at the “Press any to return” prompt to go back to the previous screen.

Chapter 27 LAN and WAN Setup Using the SMT 213