Table 72 SMT: LAN Configuration (continued)
FIELD | DESCRIPTION |
|
|
Relay Server IP | This field is only visible when you enter R in the DHCP Service field. |
Address | If the VSG is set to function as a DHCP relay, enter the IP address of the DHCP |
| server. |
Primary/ | These fields are visible when you enter S in the DHCP Service field. |
Secondary DNS IP | Enter the IP address of the DNS server(s) in the Primary DNS IP Address and/or |
Address | Secondary DNS IP Address fields. |
| |
| You must specify a DNS server. |
|
|
At the “S)ave and return R)eturn without saving M)odify:” prompt, type S and press [ENTER] to save the changes and return to the previous screen, type R and press [ENTER] to discard all changes and return to the previous screen or type M and press [ENTER] to continue configuring the fields. Restart the device when prompted
Press [ESC] and enter Y to stop any actions in the current screen and return to the previous screen. All changes will be discarded.
27.4 View Current Configuration
From the main menu, enter 4 and press [ENTER] to display the System Status menu as shown next.
Figure 147 SMT: System Status
System Name | System Status |
: | |
Doamin Name | : |
Console Port Speed | :9600 |
Web Server Port | :80 |
: | |
WAN Configuration | :Static IP |
WAN Type? (D/S/P/T) | |
IP Address | :192.168.1.1 |
Subnet Mask | :255.255.255.0 |
Gateway | :192.168.1.254 |
Primary DNS Server | :168.95.1.1 |
Secondary DNS Server | : |
DHCP Configuration | :Server |
DHCP Service? (D/R/S) | |
Start IP Address | :10.59.1.2 |
DHCP Pool Size | :253 |
Lease Time | :1440 |
Primary DNS IP Address | :168.95.1.1 |
Secondary DNS IP Address | : |
Press any key to return.
212 | Chapter 27 LAN and WAN Setup Using the SMT |