VSG-1200 User’s Guide

Note: You must restart the VSG if you change the IP address.

If you set the VSG as a DHCP server on the LAN, the VSG will automatically change the LAN DHCP settings based on the new LAN IP address.

4.7 WAN Configuration

To configure the WAN settings on the VSG, click System Setting and WAN/LAN. The WAN/LAN screen varies depending on the settings in the WAN Port Mode field.

4.7.1 Configuring WAN MAC Address

Use the WAN/LAN screen to configure the MAC address of the WAN port by either setting the VSG to use the factory default or specify the MAC address of a computer on the LAN.

Figure 19 System Setting: WAN/LAN: WAN MAC Address

The following table describes the related field in this screen.

Table 6 System Setting: WAN/LAN: WAN MAC Address

FIELD

DESCRIPTION

 

 

WAN MAC Address

Select Default to use the factory assigned MAC address.

 

If your ISP requires MAC address authentication, select Change to and enter

 

the MAC address of a computer on the LAN in the fields provided.

56

Chapter 4 LAN, WAN and Server Setup