VSG-1200 User’s Guide

1Connect the statement printer to the port labeled CONSOLE. Refer to Section 2.2 “Hardware Connections” on page 36 for more information.

2Configure the Console Type field in the System screen. Refer to Section 3.5 “General System Setting” on page 44.

3Turn on the statement printer and make sure there is printing paper.

4Press the button on the statement printer. A dynamic account is generated and the account information should be printed. Refer to Figure 84 on page 134 for a printout example.

Note: The settings of the buttons on the statement printer correspond to the three SP-200 buttons you set in the Dynamic Account Operator Panel screen. Refer to Section 9.2 “Dynamic Account General Settings” on page 95.

9.4 Viewing the Dynamic Account List

To display the dynamic account list, click Dynamic Account List. Click a heading to sort the entries in ascending or descending order based on the column if applicable.

Figure 54 Dynamic Account List

The following table describes the labels in this screen.

Table 28 Dynamic Account List

LABEL

DESCRIPTION

 

 

Refresh

Click Refresh to update this screen.

 

 

Backup

Click Backup to backup the account information to a computer. Refer to Section

 

9.4.1 “Backing Up the Dynamic Account List” on page 100.

Print List

Click Print List to print all account information to the local printer connected to the

 

computer that you use to configure the VSG.

 

Note: This does NOT display a printout preview window.

 

 

S/N

This field displays the serial number (or the Index number) of a dynamic account.

 

 

Username

This field displays the account user name. Click the heading to sort the entries in

 

ascending or descending order based on this column.

Password

This field displays the account password.

 

 

Chapter 9 Dynamic Subscriber Accounts

99