Figure 21 System Setting: WAN/LAN: PPPoE
The following table describes the related fields in this screen.
Table 8 System Setting: WAN/LAN: PPPoE
FIELD | DESCRIPTION |
|
|
WAN Port Mode | PPPoE Select this option to activate PPPoE support. |
|
|
Username | Enter the user name exactly as your ISP assigned. If assigned a name in the |
| form user@domain where domain identifies a service name, then enter both |
| components exactly as given. |
Password | Enter the password associated with the user name above. |
|
|
PPP MTU Setting | Enter the size of a Maximum Transmission Unit (MTU). |
|
|
TCP MSS Setting | Enter the size of the Maximum Segment Size (MSS). |
|
|
Service Name | Enter the name of your PPPoE service. |
|
|
Connect on Demand | Select this option when you don’t want the connection up all the time and specify |
| an idle timeout in the Max Idle Time field (maximum 65535 minutes). This is the |
| default setting with an idle timeout of 10 minutes. |
Keep Alive | Select this option when you want the Internet connection up all the time and |
| specify a redial period in the Redial Period field (maximum 65535 seconds). |
| When disconnected, the VSG will attempt to bring up the connection after the |
| redial period. |
Chapter 4 LAN, WAN and Server Setup | 59 |