ASSEMBLY
UNPACKING
This product requires assembly.
nCarefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included.
WARNING:
Do not use this product if any parts on the Packing List are already assembled to your product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury.
nInspect the product carefully to make sure no breakage or damage occurred during shipping.
nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the product.
nIf any parts are damaged or missing, please call
PACKING LIST
Power Head
Hedge Trimmer Attachment
Blade Cover
Operator’s Manual
WARNING:
If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury.
WARNING:
Do not attempt to modify this product or create acces- sories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
WARNING:
To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the product when assembling parts.
ASSEMBLING THE TOOL
See Figure 2.
nInsert the plug on the hedge trimmer attachment into the opening on the power head. Make sure the plug is fully seated.
nSlide the threaded collar onto the threaded base and turn the collar clockwise. Tighten securely.
NOTE: Once assembled correctly, the upper and lower tubes should not separate when pulled. Repeat above steps if tubes can be separated.
WARNING:
Failure to secure the upper tube to the lower tube as instructed above could result in serious injury or death.
7 — English