Assembly (Continued)
• Save all instructions
ATTACH LOWER HANDLE (See Figure 4)
1.Loosen the lower handle bolts.
2.Align the lower handle holes to the middle height adjustment holes in the transmission cover and install the M10 x 25mm flange head bolts, lock washers and nuts. Tighten all four bolts at this time.
ATTACH UPPER HANDLE (See Figure 5)
1. Slide the upper handle down over the lower handle and align the holes.
2. Insert the saddle bolts into the holes as shown and securely with the handle knobs.
3. Tighten the handle knobs securely.
ATTACH FRONT HANDLE (See Figure 1)
1. Slide the front handle onto the outside of the base frame and align the holes.
2. Install the four M8 x 25mm bolts, flat washers and locknuts and tighten securely.
If you need assistance or find any parts missing, CALL TOLL FREE:
Height
Adjustment
Holes
Transmission Cover
Lower Holes | Figure 4 |
Saddle Bolts
Handle Knobs
Saddle Bolts
Handle Knobs
Figure 5
Questions? Call Toll Free at | 9 | Copyright © 2009 MAT Engine Technologies, LLC |