Genie 114002 manual Contents, Contact us

Page 2

Operator’s Manual

Third Edition • First Printing

 

 

 

 

Important

Read, understand and obey these safety rules and operating instructions before operating this machine. Only trained and authorized personnel shall be permitted to operate this machine. This manual should be considered a permanent part of your machine and should remain with the machine at all times. If you have any questions, call Genie Industries.

Contents

 

 

Page

Safety Rules

1

Controls

8

Legend

9

Pre-operation Inspection

10

Maintenance

12

Function Tests

15

Workplace Inspection

18

Operating Instructions

19

Battery Charging Instructions

21

Transport Instructions

22

Tilt-back Operation Instructions

25

Decals

28

Specifications

32

Contact us:

 

Internet: http://www.genielift.com

 

e-mail: techpub@genieind.com

 

Copyright © 1996 by Genie Industries

First Edition: Eighth Printing, October 2001

Second Edition: Second Printing, April 2004

Third Edition: First Printing, August 2005

"Genie" and "AWP" are registered trademarks of Genie Industries in the U.S.A. and many other countries. "Super Series" is a trademark of Genie Industries.

This machine complies with

ANSI/SIA 92.3-1990.

Printed on recycled paper

Printed in U.S.A.

2

Genie AWP Super Series

Part No. 114002

Image 2
Contents Operator’s Manual Contents Contact usSafety Rules Do Not Operate UnlessElectrocution Hazards Tip-over HazardsMaximum allowable side force Fall Hazards Collision HazardsExplosion and Fire Hazard Improper Use HazardBodily Injury Hazard Damaged Machine HazardsLifting Hazard Battery and Charger Safety DC Models Burn HazardsExplosion Hazards Decal Legend AC and DC Models Air Models Platform Controls ControlsGround Controls Page Fundamentals Pre-operation InspectionBreather Cap AC & DC Models Pre-operation Inspection PRE-OPERATION InspectionObserve and Obey MaintenanceCheck the Battery DC Models Check the Hydraulic Oil Level Check the Tire Pressure RT Base ModelsCheck the Air Filter/Regulator Canister Air Models Scheduled MaintenanceCheck the Oil Lubricator Canister Drip Rate Air Models Function Tests Function Tests Setup Test Emergency StopTest Outrigger Interlock Workplace Inspection Workplace InspectionOperating Instructions Manual Lowering Emergency StopPlatform Raise and Lower Auxiliary Platform Lowering AC & DC ModelsTo Charge Battery Battery Charging InstructionsBattery and Charger Instructions Observe and Obey Dry Battery Filling Charging InstructionsLifting Instructions Transport InstructionsTransport Instructions Observe and Obey Loading for Transport Transport InstructionsLoading the Machine With a Crane Securing the MachineWinching the Machine onto a Flatbed Truck Tilt-back Frame Tilt-back Operation InstructionsTilt-back Operation Instructions Observe and obey Lowering the Tilt-back Assembly Tilting Back the MachineStowing the Tilt-back Assembly Returning the Machine to Standing PositionDecals Inspection for Decals with WordsModels with Tilt-back Frame Models without Tilt-back Frame Inspection for Decals with Symbols Models with Tilt-back Frame Models without Tilt-back Frame Specifications Machine SpecificationsSpecifications Genie Scandinavia