Genie 114002 Battery and Charger Safety DC Models Burn Hazards, Explosion Hazards, Lifting Hazard

Page 8

Operator’s Manual

Third Edition • First Printing

 

 

 

 

SAFETY RULES

Battery and Charger Safety - DC Models

Burn Hazards

Batteries contain acid. Always wear protective clothing and eye wear when working with batteries.

Avoid spilling or contacting battery acid. Neutralize battery acid spills with baking soda and water.

The battery pack must remain in an upright position.

Explosion Hazards

Batteries emit explosive gas. Keep sparks, flames and lighted tobacco away from the battery.

Charge the battery in a well- ventilated area.

Do not disconnect charger DC output wires from the battery when the charger is on.

Electrocution Hazards

Connect the charger to a grounded AC circuit only.

Do not expose the battery or charger to water or rain.

Before each use, inspect for damage. Replace damaged components before operating.

Lifting Hazard

The battery pack weighs 90 lbs / 40.8 kg. Use the appropriate number of people and proper lifting techniques when lifting the battery pack.

6

Genie AWP Super Series

Part No. 114002

Image 8
Contents Operator’s Manual Contents Contact usSafety Rules Do Not Operate UnlessElectrocution Hazards Tip-over HazardsMaximum allowable side force Fall Hazards Collision HazardsImproper Use Hazard Bodily Injury HazardExplosion and Fire Hazard Damaged Machine HazardsLifting Hazard Battery and Charger Safety DC Models Burn HazardsExplosion Hazards Decal Legend AC and DC Models Air Models Platform Controls ControlsGround Controls Page Fundamentals Pre-operation InspectionBreather Cap AC & DC Models Pre-operation Inspection PRE-OPERATION InspectionObserve and Obey MaintenanceCheck the Battery DC Models Check the Hydraulic Oil Level Check the Tire Pressure RT Base ModelsCheck the Air Filter/Regulator Canister Air Models Scheduled MaintenanceCheck the Oil Lubricator Canister Drip Rate Air Models Function Tests Function Tests Setup Test Emergency StopTest Outrigger Interlock Workplace Inspection Workplace InspectionOperating Instructions Emergency Stop Platform Raise and LowerManual Lowering Auxiliary Platform Lowering AC & DC ModelsBattery Charging Instructions Battery and Charger Instructions Observe and ObeyTo Charge Battery Dry Battery Filling Charging InstructionsLifting Instructions Transport InstructionsTransport Instructions Observe and Obey Loading for Transport Transport InstructionsLoading the Machine With a Crane Securing the MachineWinching the Machine onto a Flatbed Truck Tilt-back Frame Tilt-back Operation InstructionsTilt-back Operation Instructions Observe and obey Lowering the Tilt-back Assembly Tilting Back the MachineStowing the Tilt-back Assembly Returning the Machine to Standing PositionDecals Inspection for Decals with WordsModels with Tilt-back Frame Models without Tilt-back Frame Inspection for Decals with Symbols Models with Tilt-back Frame Models without Tilt-back Frame Specifications Machine SpecificationsSpecifications Genie Scandinavia