Genie 114002 manual Improper Use Hazard, Bodily Injury Hazard, Explosion and Fire Hazard

Page 7

Third Edition • First Printing

Operator’s Manual

 

 

 

 

Improper Use Hazard

Do not leave the machine unattended unless the key is removed to secure from unauthorized use.

Bodily Injury Hazard

Do not operate the machine with a hydraulic oil or air leak. An air leak or hydraulic leak can penetrate and/or burn skin.

Explosion and Fire Hazard

Do not operate the machine or charge the battery in hazardous locations or locations where potentially flammable or explosive gases or particles may be present.

SAFETY RULES

Damaged Machine Hazards

Do not use a damaged or malfunctioning machine.

Be sure all maintenance has been performed as specified in this manual and the Genie AWP Super Series service manual.

Be sure all decals are in place and legible.

Be sure the operator’s, safety and responsibilities manuals are complete, legible and in the storage container located on the platform.

Conduct a thorough pre-operation inspection of the machine and test all functions before each

work shift. Immediately tag and remove from service a damaged or malfunctioning machine.

Do not use the machine as a ground for welding.

Part No. 114002

Genie AWP Super Series

5

Image 7
Contents Operator’s Manual Contact us ContentsDo Not Operate Unless Safety RulesTip-over Hazards Electrocution HazardsMaximum allowable side force Collision Hazards Fall HazardsDamaged Machine Hazards Improper Use HazardBodily Injury Hazard Explosion and Fire HazardExplosion Hazards Battery and Charger Safety DC Models Burn HazardsLifting Hazard Decal Legend Ground Controls ControlsAC and DC Models Air Models Platform Controls Page Breather Cap AC & DC Models Pre-operation InspectionFundamentals PRE-OPERATION Inspection Pre-operation InspectionCheck the Battery DC Models MaintenanceObserve and Obey Check the Tire Pressure RT Base Models Check the Hydraulic Oil LevelCheck the Oil Lubricator Canister Drip Rate Air Models Scheduled MaintenanceCheck the Air Filter/Regulator Canister Air Models Function Tests Test Emergency Stop Function Tests SetupTest Outrigger Interlock Workplace Inspection Workplace InspectionOperating Instructions Auxiliary Platform Lowering AC & DC Models Emergency StopPlatform Raise and Lower Manual LoweringDry Battery Filling Charging Instructions Battery Charging InstructionsBattery and Charger Instructions Observe and Obey To Charge BatteryTransport Instructions Observe and Obey Transport InstructionsLifting Instructions Transport Instructions Loading for TransportWinching the Machine onto a Flatbed Truck Securing the MachineLoading the Machine With a Crane Tilt-back Operation Instructions Observe and obey Tilt-back Operation InstructionsTilt-back Frame Tilting Back the Machine Lowering the Tilt-back AssemblyReturning the Machine to Standing Position Stowing the Tilt-back AssemblyInspection for Decals with Words DecalsModels with Tilt-back Frame Models without Tilt-back Frame Inspection for Decals with Symbols Models with Tilt-back Frame Models without Tilt-back Frame Machine Specifications SpecificationsSpecifications Genie Scandinavia