Genie 114002 manual Lowering the Tilt-back Assembly, Tilting Back the Machine

Operator’s Manual Third Edition • First Printing

TILTBACK OPERATION INSTRUCTIONS

Lowering the Tilt-back

Assembly

1Be sure the area behind the machine and under the tilt-back frame is clear of personnel and obstructions.

2Fully lower the platform.

3Remove the outriggers from the base and place them in the storage sockets.

The tilt-back frame is spring loaded and will immediately fall outward when the retaining pin is removed. Maintain a firm grasp on the tilt- back frame and remove the retaining pin.

4Lower the tilt-back frame and guide the tilt-back strut into the strut socket.

5 Insert the retaining pin into the strut socket.

Tilting Back the Machine

1Slide out the T- handle until the lock pin snaps into place.

2Lift the machine with the T-handle to mid-tilt position—

casters on the tilt-back frame are in contact with the floor, and the machine is supported by the extended tilt-back strut. Use the appropriate number of people and proper lifting techniques.

3Continue lifting until the telescoping tilt-back strut is completely compressed.

4Return the sliding T-handle to the stowed position.

26 Genie AWP Super Series Part No. 114002