Genie 114002 manual Decal Legend

Page 9

Third Edition • First Printing

Operator’s Manual

 

 

 

 

 

SAFETY RULES

Decal Legend

Genie product decals use symbols, color coding and signal words to identify the following:

Safety alert symbol—used to alert personnel to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

Red—used to indicate the presence of an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Orange—used to indicate the presence of a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Yellow with safety alert symbol— used to indicate the presence of a potentially hazardous situation which, if not avoided, may cause minor or moderate injury.

Yellow without safety alert symbol—used to indicate the presence of a potentially hazardous situation which, if not avoided, may result in property damage.

Green—used to indicate operation or maintenance information.

Part No. 114002

Genie AWP Super Series

7

Image 9
Contents Operator’s Manual Contact us ContentsDo Not Operate Unless Safety RulesTip-over Hazards Electrocution HazardsMaximum allowable side force Collision Hazards Fall HazardsBodily Injury Hazard Improper Use HazardExplosion and Fire Hazard Damaged Machine HazardsBattery and Charger Safety DC Models Burn Hazards Explosion HazardsLifting Hazard Decal Legend Controls Ground ControlsAC and DC Models Air Models Platform Controls Page Pre-operation Inspection Breather Cap AC & DC ModelsFundamentals PRE-OPERATION Inspection Pre-operation InspectionMaintenance Check the Battery DC ModelsObserve and Obey Check the Tire Pressure RT Base Models Check the Hydraulic Oil LevelScheduled Maintenance Check the Oil Lubricator Canister Drip Rate Air ModelsCheck the Air Filter/Regulator Canister Air Models Function Tests Test Emergency Stop Function Tests SetupTest Outrigger Interlock Workplace Inspection Workplace InspectionOperating Instructions Platform Raise and Lower Emergency StopManual Lowering Auxiliary Platform Lowering AC & DC ModelsBattery and Charger Instructions Observe and Obey Battery Charging InstructionsTo Charge Battery Dry Battery Filling Charging InstructionsTransport Instructions Transport Instructions Observe and ObeyLifting Instructions Transport Instructions Loading for TransportSecuring the Machine Winching the Machine onto a Flatbed TruckLoading the Machine With a Crane Tilt-back Operation Instructions Tilt-back Operation Instructions Observe and obeyTilt-back Frame Tilting Back the Machine Lowering the Tilt-back AssemblyReturning the Machine to Standing Position Stowing the Tilt-back AssemblyInspection for Decals with Words DecalsModels with Tilt-back Frame Models without Tilt-back Frame Inspection for Decals with Symbols Models with Tilt-back Frame Models without Tilt-back Frame Machine Specifications SpecificationsSpecifications Genie Scandinavia