Operator’s Manual | Third Edition • First Printing |
|
|
|
|
TRANSPORT INSTRUCTIONS
Securing the Machine
Use chains or straps of ample load capacity.
Use a minimum of 2 chains.
Adjust the rigging to prevent damage to the chains.
Winching the Machine onto a Flatbed Truck
1Fully lower the platform.
2Push in the red Emergency Stop buttons, turn the key switch to the off position and remove the key.
3Remove the outriggers from the base and place them in the storage sockets.
4Inspect the entire machine for loose or unsecured items.
5Connect the cable to the winching point located at the rear of the base.
6Carefully winch the machine onto the truck.
7Secure the machine base to the transport vehicle. See Securing the Machine.
Loading the Machine With a Crane
Use the lifting eye mounted on the rear mast column.
The battery pack must be removed before lifting the machine with a crane. Disconnect the battery plug before removing the battery pack.
Be sure to inspect the machine and remove any loose or unsecured items.
Always place the lifting hook through the lifting eye so that it points away from the machine.
24 | Genie AWP Super Series | Part No. 114002 |