Operator’s Manual | Third Edition • First Printing |
|
|
|
|
SAFETY RULES
Fall Hazards
The guard rail system provides fall protection. If occupants of the platform are required to wear personal fall protection equipment (PFPE) due to job site or employer rules, PFPE equipment and its use shall be in accordance with the PFPE manufacturer’s instructions and applicable governmental requirements.
Do not sit, stand or climb on the platform guard rails. Maintain a firm footing on the platform floor at all times.
Do not exit the platform while raised. If a power failure occurs, have ground personnel activate the manual lowering valve.
Keep the platform floor clear of debris.
Lower the platform entry
Collision Hazards
Operators must comply with employer, job site and governmental rules regarding the use of personal protective equipment.
Check the work area for overhead obstructions or other possible hazards.
Be aware of crushing hazard when grasping the platform guard rail.
Do not lower the platform unless the area below is clear of personnel and obstructions.
Use common sense and planning to control the movement of the machine on or near inclines.
Stay clear of descending platform.
4 | Genie AWP Super Series | Part No. 114002 |