(3)Loosen the five bolts and remove the cover bracket from the inverter unit.
M6 x 12mm Flange bolt : 2pcs.
M6 x 18mm Flange bolt : 2pcs.
M6 x 25mm AY Bolt : 1pce.
NOTE : At this step, electric wires are still connected to the control panel. Therefore, do not try to separate the control panel forcedly. Separate the control panel after removing fuel tank at
5-3-7 REAR COVER
(1) Remove the muffler cover.
M6 x 18mm Flange bolt : 6pcs.
Tools : 10mm Box wrench
Muffler cover |
(Rear) |
(2) Remove the upper rear cover.
Rear cover (Upper )
5-3-8 WIRE BAND
Cut the wire bands that are binding wires behind the control panel.
For electric start models, cut the wire band that is binding battery cables also.
Tools : Nipper
– 25 –
Wire band |