5-4-12 CARBURETOR
(1) Install the Sponge Insulator around the intake flange.
(2) Install the Carburetor to the intake flange.
NOTE: Be sure to attach the gasket between the
carburetor and the intake flange.
5-4-13 AIR CLEANER BASE
Attach the Air Cleaner Base to the carburetor and fix with two M6 bolts and one M6 Flange bolt.
M6 Flange nut : 2 pcs.
M6 x 20mm Flange bolt : 1 pce.
Tightening torque : 6.0-8.0 N・m
60-80 kgf・cm
(4.4-5.9 ft・lbs)
5-4-14 AIR CLEANER ELEMENT
Assemble the Air Cleaner Element and the Air Cleaner
Cover to the air cleaner base.
Wash the cleaner element if it is dirty before reassembly.
Sponge insulator |
Air cleaner |
Carburetor |
Element | Cleaner cover |
– 42 –