5-4-24 REAR COVER (UPPER) and
MUFFLER COVER (REAR)
(1) Attach the Rear Cover (Upper) first to the frame.
(2)Install the Muffler Cover (Rear) onto the Rear Cover (Upper) and the frame.
M6 x 18mm Flange bolt : 6pcs.
Tightening torque : | N・m |
kgf・cm | |
ft・lbs) | |
|
|
(1)Assemble the Bracket (Cover) to the inverter unit. M6 x 18mm Flange bolt : 2 pcs.
M6 x 25mm Flange bolt : 1 pce. (for right side of
the inverter unit)
Tightening torque : 4.0-6.0 N・m
(2)Assemble the Front Cover (Lower) below the Front Cover (Upper)
M6 x 18mm Flange bolt : 2 pcs.
(3)Attach the Front Cover (Upper). M6 x 18mm Screw : 4 pcs.
Tightening torque : 4.0-6.0 N・m
Rear cover (Upper )
Muffler cover |
(Rear) |
– 46 –