Craftsman 919.670070, MGP-670070 Safety Guidelines Definitions, Important Safety Instructions

Page 3

SAFETY GUIDELINES - DEFINITIONS

This manual contains information that is important for you to know and understand. This information relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we use the symbols to the right. Please read the manual and pay attention to these sections.

DANGER indicates an imminently hazardous situation

CAUTION indicates a potentially hazardous situation

 

which, if not avoided, may result in minor or moderate

 

which, if not avoided, will result in death or serious

 

injury.

 

injury.

 

 

 

WARNING indicates a potentially hazardous situation

CAUTION used without the safety alert symbol indicates a

 

which, if not avoided, could result in death of serious

potentially hazardous situation which, if not avoided, may

 

injury.

result in property damage.

 

 

 

 

This product is not equipped with a spark arresting muffler. If the product will be used around flammable materials, or on land covered with materials such as agricultural crops, forest, brush, grass, or other similar items, then an approved spark arrester must be installed and is legally required in the state of California. It is a violation of California statutes section 130050 and/or sections 4442 and 4443 of the California Public Resources Code, unless the engine is equipped with a spark arrestor, as defined in section 4442, and maintained in effective working order. Spark arresters are also required on some U. S. Forest service land and may also be legally required under other statutes and ordinances.

This product may contain chemicals known to the state of California to cause cancer, birth

defects, or other reproductive harm. This warning is given in compliance with California Proposition 65, as detectable amounts of chemicals subject to proposition 65 may be contained in this product.

IMPORTANT SAFETY INSTRUCTIONS

• SAVE THESE INSTRUCTIONS •

When using this product basic precautions should always be followed including the following:

RISK OF ELECTROCUTION AND FIRE

 

HAZARD

WHAT COULD HAPPEN

HOW TO PREVENT IT

 

 

 

 

 

 

Attempting to connect generator di-

Back feeding electricity through a

Never backfeed electricity through

 

rectly to the electrical system of any

building’s electrical system to the

a structure's electrical system.

 

building structure.

outside utility feed lines could en-

 

 

 

 

danger repair persons attempting to

 

 

 

 

restore service.

 

 

 

 

Attempting to connect to the incom-

To connect to a structure's electri-

 

 

cal system in a safe manner,

 

 

ing utility service could result in

 

 

always have a Double-Throw

 

 

electrocution.

 

 

Transfer Switch installed by a

 

 

 

 

 

Restoration of electrical service while

qualified electrician and in compli-

 

 

ance with local ordinances. (When

 

 

the generator is connected to the in-

 

 

installing a Double-Throw

 

 

coming utility could result in a fire or

 

 

Transfer Switch, a minimum of

 

 

serious damage if a isolator switch is

 

 

10 gauge wiring must be used.)

 

 

not installed.

 

 

 

 

 

 

Failure to use a double throw transfer

 

 

 

 

switch when connecting to a struc-

 

 

 

 

tures electrical system can damage

 

 

 

 

appliances and WILL VOID the

 

 

 

 

manufacturers warranty.

 

 

 

 

 

 

 

3 — ENG

MGP-670070

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Owners Manual GeneratorSold by Sears Canada, Inc., Toronto, Ont. M5B2B8 Table of Contents Risk of Electrocution and Fire Safety Guidelines DefinitionsImportant Safety Instructions Hazard What could Happen HOW to Prevent ITRisk of Electrocution and Fire cont’d Fined Area Risk of FireOr wall. do not Operate Unit Indoors or in ANY CONRead and Understand ALL Warnings Before Risk of Breathing Inhalation HazardOn your generator Protector will void the warrantyRisk of Unsafe Operation L. listed voltage surgeRisk of HOT Surfaces Risk of Moving PartsRisk from Lifting Carton Contents AssemblyRemove Generator from Carton Tools Needed for AssemblyNut Solenoid Installation of BatteryNegative Battery Cable Connection Star Washer Grounding the GeneratorInstalling Wheel KIT Operation Know Your GeneratorNot shown Obtaining Electricity from Generator ReceptaclesLOW OIL Shutdown Generator CapacityGasoline Connecting Generator To Main Electrical SupplyBefore Starting Engine Adding Engine OilTo Start Your Generator Stopping EngineFor recoil start Customer Responsibilities Table MaintenanceConnecting Electrical Loads Maintenance TaskGenerator Maintenance Engine MaintenanceGeneral Recommendations Replace Fuel In-Line Filter Clean and Replace Spark PlugAir Cleaner Clean Cooling SystemGovernor Service AdjustmentsStorage CarburetorProblem Cause Correction Troubleshooting GuideEmissions Control Systems Statement Owner’s Warranty ResponsibilitiesENG ENG ENG Service and Repair Parts Vendu par Sears Canada, Inc., Toronto, Ont. M5B 2B8 Génératrice DEResponsabilités DU Client Entente D’ENTRETIENRisques Délectrocution ET D’INCENDIE Conserver CES DirectivesRisques Prévention Rieur OU Dans UN Endroit Clos Risques D’INCENDIERisques AUX Voies Respiratoires ET Risques D’INHALATION Les moteurs à essence produisent Génératrice Risques D’UNE Utilisation DangereuseRisques Reliés AUX Surfaces Chaudes Risques Reliés AUX Pièces MobilesRisques Lors DU Levage Sac à pièces pour la pose de la batterie Contenu DE L’EMBALLAGESac à pièces Pièces et boîte à pièces pour l’ensemble de rouesRetrait DE LA Génératrice DE SON Emballage Outils Requis Pour L’ASSEMBLAGEPose Typique D’UNE Batterie Mise À LA Terre DE LA GénératriceÉcrou Solénoï de Support du Moteur Pose DE L’ENSEMBLE DE RouesBien Connaître Votre Génératrice FonctionnementComment Obtenir DE L’ÉLECTRICITÉ DE LA Génératrice PrisesDispositif D’ARRÊT Suite À UN Niveau BAS D’HUILE Capacité DE LA GénératriceEssence Remplissage d’huile moteur Avant DE Démarrer LE MoteurDémarrage à rappel Démarrage du moteurArrêt du moteur Démarrage électriqueTâche D’ENTRETIEN EntretienTableau DES Responsabilités DU Client Branchement DE Charges ÉlectriquesHuile Recommandations GénéralesEntretien DE LA Génératrice Entretien DU MoteurNettoyage du système de refroidissement Nettoyage et remplacement de la bougie dallumageRemplacement du filtre à carburant en ligne Filtre à airRéglages D’ENTRETIEN EntreposageDirectives Pour L’ENTREPOSAGE Problème Cause Correction Guide DE DépannageResponsabilités de garantie du propriétaire Remarque Remarque Remarque Entretien ET Pieces DE Rechange

MGP-670070, 919.670070 specifications

The Craftsman 919.670070, also known as MGP-670070, is a premier solution for those seeking a reliable and efficient air compressor. This model stands out in the crowded market of air compressors due to its robust design and versatile functionality, making it a go-to choice for both professionals and DIY enthusiasts.

One of the primary features of the Craftsman 919.670070 is its powerful motor. With a horsepower rating that ensures high performance, it delivers a consistent airflow suitable for a variety of tasks, from inflating tires to powering pneumatic tools. This capability makes it an ideal asset for both home workshops and professional garage settings.

The tank capacity of the MGP-670070 is another highlight. With a sizeable tank, it can store ample compressed air, allowing users to complete larger tasks without the need for frequent refills. This characteristic greatly enhances productivity, as users can work without interruption.

Portability is a significant consideration for many users, and the Craftsman 919.670070 excels in this aspect. Its compact design, combined with sturdy wheels and a comfortable handle, ensures that it can be easily transported from one location to another, making it perfect for job sites or moving around the home.

Safety features have not been overlooked in the design of the MGP-670070. It comes equipped with an automatic shut-off mechanism that activates when the desired pressure is reached, preventing over-pressurization and extending the lifespan of the machine. Additionally, it often includes a thermal overload protection system that helps protect the motor from overheating.

The compressor's user-friendly control panel features gauges that provide clear readings of both tank pressure and outlet pressure, ensuring that users can monitor performance easily. Coupled with quick-connect fittings, the MGP-670070 allows for fast and uncomplicated hose connections, streamlining the workflow.

Technologically, this model includes a noise-reduction design that operates at lower decibel levels compared to traditional compressors. This feature makes it particularly appealing for use in residential areas where noise can be a concern.

In summary, the Craftsman 919.670070, MGP-670070, is not just another air compressor on the market; it embodies a combination of power, efficiency, and user-centric design. Whether you are a seasoned professional or a weekend warrior, this compressor meets various needs with reliability and ease of use, making it a valuable addition to any toolkit.
Top Page Image Contents