Briggs & Stratton 030235-01 manual Storage

Page 19

Storage

The generator should be started at least once every seven days and allowed to run at least 30 minutes. If this cannot be done and you must store the unit for more than

30 days, use the following guidelines to prepare it for storage.

Generator Storage

•Clean the generator as outlined in Cleaning in the Maintenance section.

•Check that cooling air slots and openings on generator are open and unobstructed.

Long Term Storage Instructions

It is important to prevent gum deposits from forming in essential fuel system parts, such as the carburetor, fuel filter, fuel hose, or tank during storage. Also, experience indicates that alcohol-blended fuels (called gasohol, ethanol, or methanol) can attract moisture, which leads to separation and formation of acids during storage. Acidic fuel can damage the fuel system of an engine while in storage.

WARNING

Fuel and its vapors are extremely flammable and explosive.

Fire or explosion can cause severe burns or death.

When adding or draining fuel:

•Turn generator OFF and let it cool at least 2 minutes before removing fuel cap. Loosen cap slowly to relieve pressure in tank.

•Fill or drain fuel tank outdoors.

•DO NOT overfill tank. Allow space for fuel expansion.

•If fuel spills, wait until it evaporates before starting engine.

•Keep fuel away from sparks, open flames, pilot lights, heat, and other ignition sources.

•DO NOT light a cigarette or smoke.

Protect Fuel System

Fuel Stabilizer:

Follow these instructions if storing fuel more than 30 days.

To protect the fuel system from gum formation, use Briggs & Stratton FRESH START™ fuel stabilizer plus.

If fuel stabilizer is used, you do not need to drain fuel prior to storage.

•Run engine outdoors for several minutes to be sure treated fuel has replaced untreated fuel in carburetor.

If fuel preserver is not used, then always remove all fuel from tank and run engine until it stops from lack of fuel.

Change Oil

While engine is still warm, drain oil from crankcase. Refill with recommended grade.

Oil Cylinder Bore

•Remove spark plug and pour about 1/2 ounce (15 ml) of clean engine oil into the cylinder.

•Install spark plug and pull starter handle slowly to distribute oil.

WARNING

Unintentional sparking can result in fire or electric shock.

•NEVER crank engine with spark plug removed.

Other Storage Tips:

•DO NOT store fuel from one season to another unless it has been treated as described in Protect Fuel System.

•Replace fuel container if it starts to rust. Rust and/or dirt in fuel can cause problems if it’s used with this unit.

•Store unit in a clean and dry area.

•Cover unit with a suitable protective cover that does not retain moisture.

WARNING

Storage covers can be flammable.

•DO NOT place a storage cover over a hot generator.

•Let equipment cool for a sufficient time before placing the cover on the equipment.

•Store generator in clean, dry area.

17

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Watts Revision Serial Number Engine Model Number Date Purchased Where to Find UsTable of Contents Hazard Symbols and Meanings Safety RulesWhen transporting or repairing equipment When adding or draining fuelWhen starting equipment When operating equipmentEquipment Description AssemblyShipment Contents Install Wheel KitType of Fuel When adding fuelVerify Engine Oil Level Add FuelSpecial Requirements Connecting to a Building’s Electrical SystemSystem Ground Generator Location120/240 Volt AC, 30 Amp Locking Receptacle Features and ControlsVolt AC, 20 Amp, Duplex Receptacles ReceptaclesGenerator Adapter Cord Set 120/240 Volt AC, 30 Amp, Locking ReceptacleStarting the Engine OperationStopping the Engine Connecting Electrical LoadsExample Power ManagementDon’t Overload Generator CapacityEmissions Control MaintenanceMaintenance Schedule General RecommendationsOil Recommendations Generator MaintenanceCleaning OilAdding Engine Oil Checking Oil LevelChanging Engine Oil Service Spark Plug Service Air CleanerClean Spark Arrester Screen Check Valve Clearance Carburetor AdjustmentClean and inspect the spark arrester as follows Engine Air Cooling SystemStorage Troubleshooting Engine Technical Information SpecificationsReplacement Parts Maintenance ItemsWarranted Parts Owner’s Warranty ResponsibilitiesLength of Coverage No Charge Maintenance Consequential CoverageClaims and Coverage Exclusions Warranty Period This page reserved Dónde encontrarnos Operando Resolución de problemas Especificaciones GarantíasMontaje Controles y característicasSímbolos de peligro y sus significados Normas de seguridadCuando transporte o repare el equipo Cuando anada combustible o vacíe el depósitoCuando ponga en funcionamiento el equipo Cuando opere el equipoContenido de la caja MontajeDescripción del equipo Desembalaje del generadorTipo de gasolina Comprobar el nivel de aceite del motorAgregue combustible Cuando anada combustibleRequisitos Especiales Tierra del sistemaConexión al sistema eléctrico de un edificio Ubicación del generadorControles y características del generador Juego de cables del adaptador del generador Tomas eléctricasTomas eléctricas dobles de 120 V CA y 20 a Dispositivo de seguridad de 120/240 V, 30 aEncienda el motor OperandoParada del motor Conexión de cargas eléctricasControl de la energía No sobrecargar el generadorCapacidad EjemploControl de emisiones MantenimientoPlan de mantenimiento Recomendaciones GeneralesRecomendaciones sobre el aceite Mantenimiento del GeneradorLimpieza AceiteAdición de Aceite del Motor Comprobación del Nivel de AceiteCambio de Aceite del Motor Servicio del bujía Servicio del depurador de aireLimpie la Pantalla Apagachispas Limpie e inspeccione el apagachispas de la siguiente manera Sistema de refrigeración de aireComprobación de holgura de la válvula Ajuste del CarburadorAlmacenamiento Problemo Causa Accion Resolución de problemasInformación técnica sobre el motor Piezas garantizadas Responsabilidades de la garantía del propietarioDuración de la cobertura Cobertura de daños derivados Servicio gratuitoSolicitudes y exclusiones de cobertura MantenimientoPeríodo DE Garantía

030235-01 specifications

The Briggs & Stratton 030235-01 is a key component in the realm of outdoor power equipment, renowned for its reliability and performance. This model is primarily designed for use in portable generators, offering a powerful and efficient engine that meets the demands of users looking for dependable energy solutions.

One of the standout features of the 030235-01 is its impressive engine output. With a robust design, it provides a reliable source of power for various applications, whether for home backup during outages or for job sites requiring portable energy. This model is built with a reliable four-stroke engine, allowing for smooth operation and reduced emissions compared to two-stroke engines. This makes it an environmentally friendly option for those needing outdoor power.

The motor is equipped with advanced technologies that enhance its performance. The overhead valve (OHV) design optimizes engine efficiency while maintaining low operating temperatures, ensuring longer life and reduced wear. Additionally, the engine features a splash lubrication system, taking care of critical components to minimize friction and ensure a smooth operation even under heavy loads.

Another key characteristic of the Briggs & Stratton 030235-01 is its easy-starting capability. Many users appreciate this feature, especially during emergencies when time is of the essence. The primer bulb and choke system facilitate a hassle-free startup, allowing users to get the engine running with minimal effort.

Durability is also a key focus of this engine's design. Constructed with high-quality materials and comprehensive engineering, the 030235-01 can withstand the rigors of frequent use. It has a sturdy build that resists corrosion, making it suitable for various outdoor conditions. Coupled with routine maintenance, this generator can serve users for years to come.

On the ease of use front, the Briggs & Stratton 030235-01 is designed for straightforward operation. It has an intuitive control panel that enables users to manage their power needs without any confusion, enhancing the overall user experience.

In summary, the Briggs & Stratton 030235-01 stands out for its powerful engine output, innovative technologies such as OHV design and splash lubrication, durability under various conditions, and user-friendly operation. This combination makes it a preferred choice for those seeking reliable portable power solutions.
Top Page Image Contents