Classe Audio CA-M400 specs

ENGLISH

warm up/break-in period

please read this manual…

The CA-M400 includes protection circuitry that will prevent the ampliﬁer from operating at dangerously high or low voltages.

•At startup: the AC mains voltage must be within a range of approximately -15% to +10% of its nominal value at startup, or the ampliﬁer will not turn on. For example, a 120V unit requires the AC mains to be between approximately 95V–135V in order to turn on.

•Over-voltage during operation: if the AC mains voltage surges by roughly 10% or more during operation, the ampliﬁer will enter protection mode and shut down. The Standby LED will ﬂash to indicate the protection mode has been engaged.

•Under-voltage during operation: if the AC mains voltage sags by 15% or more, the ampliﬁer will continue to play (since this does not present a particular danger to the ampliﬁer), but note that

it may not be able to achieve its usual standard of performance under these compromised conditions. The Standby LED will ﬂash to indicate the condition.

Your new Classé power ampliﬁer will deliver outstanding performance immediately. However, you should expect to hear it improve somewhat as it reaches its normal operating temperatures and its various components “break-in.” It has been our experience that the greatest changes occur within the ﬁrst 300 hours, as the ampliﬁer reaches thermal equilibrium and the capacitors fully form. After this initial break-in period, the performance of your new product should remain quite consistent for years to come.

The only exception to this rule is if the unit is placed in standby or unplugged for an extended period of time, allowing it to cool down. Depending on the degree of cooling involved, you should expect a brief warm-up period before the power ampliﬁer’s sound quality is at its best. Unless your ampliﬁer was allowed to become quite chilled, subsequent thermal re-stabilization should not take long. Fortunately, you should never have to repeat the initial 300 hour break-in period.

Please take a few minutes to review this manual, and to familiarize yourself with your new ampliﬁer. We understand that you are anxious to plug everything in and get started. However, reading this manual and following the advice it gives will ensure that you get all the beneﬁts you deserve from having purchased such a ﬁne piece of equipment.

CA-M400 specifications

The Classe Audio CA-M400 is a high-performance power amplifier that encapsulates the essence of quality sound engineering and sophisticated design. Hailing from the renowned Canadian audio manufacturer Classe Audio, this amplifier is designed for audiophiles who demand both power and precision in their audio playback.

One of the standout features of the CA-M400 is its impressive power output. Delivering 400 watts per channel into 8 ohms and 800 watts per channel into 4 ohms, this amplifier is capable of driving a wide range of speakers with ease, ensuring that even the most demanding systems receive ample power. This power is supplemented by Classe's proprietary Current Feedback topology, which allows for high-speed response and minimal distortion, resulting in clear and dynamic sound reproduction.

The CA-M400 employs a dual-mono design, ensuring that each channel operates independently for enhanced imaging and soundstage depth. This configuration not only contributes to the clarity of audio reproduction but also minimizes crosstalk between channels, delivering a more immersive listening experience. The use of high-quality components and a robust power supply further enhances performance, providing exceptional stability and reliability even during peak demands.

Another defining characteristic of the Classe Audio CA-M400 is its system control capabilities. It features a comprehensive range of input options, including balanced XLR and single-ended RCA connections, allowing for flexible integration into various audio setups. Additionally, the amplifier supports remote power control, making it user-friendly and easy to manage within a home theater or stereo system.

Furthermore, the design of the CA-M400 exudes elegance and sophistication. Its sleek chassis is crafted with meticulous attention to detail, featuring a brushed aluminum finish and an intuitive front panel. The amplifier also features a highly efficient thermal management system, ensuring it remains cool during extended listening sessions without compromising performance.

In summary, the Classe Audio CA-M400 is a power amplifier that combines raw power with cutting-edge technology to deliver an unparalleled audio experience. With its formidable power output, innovative design, and exceptional build quality, it stands as a remarkable choice for anyone looking to elevate their audio setup to new heights. Whether it be for critical listening or high-octane movie nights, the CA-M400 promises to deliver an impressive sonic performance that will satisfy even the most discerning audiophiles.