Sanyo PLC-XT20K Input Source Selection, Input Menu, RGB PC analog RGB Scart RGB PC digital

Page 35

Input Selection

Input Source Selection

Menu Operation

Input Menu

1

Press the MENU button to display the On-Screen

 

 

Menu. Use the Point 78 buttons to move the red

 

 

frame pointer to the Input Menu icon.

 

2

Use the Point ed buttons to move the red arrow

 

 

pointer to the desired input and then press the

 

 

SELECT button. The signal format menu appears.

 

3

Use the Point ed buttons to select the desired signal

 

 

format and then press the SELECT button.

 

INPUT 1

RGB (PC analog)

RGB (Scart)

RGB (PC digital)

RGB (AV HDCP)

When the RGB PC (analog) signal is connected

When the RGB PC (scart) signal is connected

When the RGB PC (digital) signal is connected.

When the HDCP video signal is connected.

INPUT 2

RGB

Video

Component*

When the RGB PC signal is connected.

When the RGB video signal is connected.

When the component signal is connected.

*If the projector cannot reproduce proper video image, select a system manually (see “Video System Selection” on page 36).

INPUT 3

Auto

Video*

S-video*

When selecting Auto, the projector automatically detects an incoming video signal and adjusts itself to optimize its performance. The projector selects the connection in the following order:

1.S-video

2.Video

When the video signal is connected.

When the S-video signal is connected.

*If the projector cannot reproduce proper video image, select a system manually (see “Video System Selection” on page 36).

35

Image 35
Contents Multimedia Projector Compact Design Power Management Features and DesignTable of Contents Risk of Electric Shock Do not Open To the OwnerSafety Instructions Top Control Air CirculationPositioning Precautions Installing the Projector in Proper DirectionsTransporting the Projector Moving the ProjectorCompliance AC Power Cord for the United States and CanadaAC Power Cord for the United Kingdom Front Back Bottom Part Names and FunctionsRear Terminal 4INFRARED Remote Receiver Back Reset buttonTop Control Remote Control 5D.ZOOM button 4P-TIMER button9RESET/ON/ALL-OFF switch 3MENU buttonSpotlight Pointer Laser Pointer FunctionPointer Function Remote Control Code Wireless Mouse OperationAdjustable Feet Remote Control Battery InstallationRemote Control Receivers and Operating Range Attaching the lens to the projector InstallationLens Installation Removing the lensMoving the Lens Positioning the Projector for PLC-XT25/XT25K/XT21/XT20/XT20KProjector side AC outlet side Connecting the AC Power CordCables used for connection Connecting to a Computer Digital and Analog RGBConnecting to Video Equipment Video, S-Video Connecting to Video Equipment Component and RGB Scart PIN Code Input Dialog Box Basic OperationTurning On the Projector Selected Input Source and Lamp ControlTurning Off the Projector On-Screen Menu How to Operate the On-Screen MenuRemote Control Menu Bar Information Operating with Projector ControlLens Operation Menu Operation Sound AdjustmentDirect Operation Operating with Remote Control Keystone button Timer buttonNo Show button Input Selection Top Control Operation Remote Control OperationRemote Control button operation InputVideo Component Input Source SelectionInput Menu RGB PC analog RGB Scart RGB PC digitalAV System Menu Video or S-Video Video System SelectionVideo or S-Video ComponentHelpful Hints Computer AdjustmentPC System Menu Computer System SelectionSelecting Computer System Manually Auto PC Adj Auto PC AdjustmentPC Adjust Menu To store adjustment parametersManual PC Adjustment To store the adjusted data To clear the adjusted dataMemo Image Mode Selection Image Menu Image Mode SelectionImage Adjustment Image Adjust Menu Image AdjustmentProgressive SharpnessGamma Noise reductionTo reset the adjusted data, select Reset and press Screen Adjustment Keystone Screen AdjustmentScreen Menu Screen Size Adjustment Computer Signals Screen Size Adjustment Video, Component Signals Setting Pointer SettingSetting Menu Language Capture Logo Logo and Logo PIN code lock settingsLogo Capture Logo selectLogo PIN code lock Change the Logo PIN code lock settingEnter a Logo PIN code Change the Logo PIN codeRemote control Display On start Power managementPower management Key lock Fan controlPIN code lock Change the PIN code lock settingEnter a PIN code Lamp counter Change the PIN codeTest pattern Filter counter Factory defaultFactory default Filter counterRecommendation Maintenance and Filter CleaningPage Model No. of your projector Lamp ReplacementReplacement Lamp Type No. POA-LMP105 Service Parts No 330 Reset the lamp counterLamp counter Resetting the Lamp CounterThen check the matters below Projector is shut down and all five indicators are blinkingCleaning the Projector Cabinet Cleaning the Projection LensAppendix TroubleshootingAppendix Information Input Menu TreeInput Setting PC Adjust ScreenProjector Condition Indicators and Projector ConditionOr replace the filter see below Lamp Replace indicatorON-SCREEN Resolution Compatible Computer Specifications31.47 59.94 Technical Specifications Optional Parts AccessoriesPJ Link Notice Terminal Mini DIN 8-PIN Configurations of TerminalsUSB Connector Series B Terminal Analog RGB Mini D-sub 15 pinLogo PIN Code Lock No PIN Code Number MemoDimensions MZ7A-B