Sanyo PLC-XT20K, PLC-XT25K, PLC-XT20L* owner manual Turning Off the Projector

Page 26

Basic Operation

Turning Off the Projector

1

Press the ON/STAND-BY button on the top control or

 

 

 

 

 

the STAND-BY button on the remote control, and

 

 

 

 

 

“Power off?” appears on the screen.

 

 

 

 

2

Press the ON/STAND-BY button or the STAND-BY

 

 

 

 

 

 

 

 

 

 

 

 

 

button on the remote control again to turn off the

 

 

 

 

 

projector. The LAMP indicator turns off and the POWER

 

 

 

 

 

indicator starts to blink green. After the projector is

 

 

 

 

 

“Power off?” disappears after 4 seconds.

 

turned off, the cooling fans operates for 90 seconds.

 

During the POWER indicator is blinking, you cannot turn

 

 

 

 

 

on the projector.

 

 

 

 

3

When the projector has cooled down enough, the

 

 

 

 

 

POWER indicator stops blinking and you can turn on

 

 

 

 

the projector. After it is cooled down completely, unplug the AC power cord.

TO MAINTAIN LIFE OF THE LAMP, ONCE YOU

TURN THE PROJECTOR ON, WAIT AT LEAST FIVE

MINUTES BEFORE TURNING IT OFF.

DO NOT UNPLUG THE AC POWER CORD WHILE

THE COOLING FANS ARE RUNNING OR BEFORE

THE POWER INDICATOR STOPS BLINKING.

OTHERWISE IT WILL RESULT IN SHORTENING

THE LAMP LIFE.

DO NOT OPERATE THE PROJECTOR

CONTINOUSLY WITHOUT REST. CONTINUOUS

USE MAY RESULT IN SHORTENING THE LAMP

LIFE. TURN OFF THE PROJECTOR AND LET

STAND FOR ABOUT AN HOUR IN EVERY 24

HOURS.

Notes:

•When the On start function is set to “On,” the projector will be turned on automatically by connecting the AC power cord to an AC outlet (p.58).

•The running speed of cooling fans is changed according to the temperature inside the projector.

•Do not put the projector in a case before the projector is cooled enough.

•If the WARNING TEMP. indicator blinks or all the five indicators on the top panel blink, see “Warning Indicators” on page 67.

•While the POWER indicator is blinking, the lamp is being cooled down and the projector cannot be turned on. Wait until the POWER indicator stops blinking to turn on the projector again.

26

Image 26
Contents Multimedia Projector Features and Design Compact Design Power ManagementTable of Contents To the Owner Risk of Electric Shock Do not OpenSafety Instructions Air Circulation Top ControlInstalling the Projector in Proper Directions Positioning PrecautionsMoving the Projector Transporting the ProjectorCompliance AC Power Cord for the United States and CanadaAC Power Cord for the United Kingdom Part Names and Functions Front Back BottomRear Terminal Reset button 4INFRARED Remote Receiver BackTop Control Remote Control 3MENU button 4P-TIMER button9RESET/ON/ALL-OFF switch 5D.ZOOM buttonSpotlight Pointer Laser Pointer FunctionPointer Function Wireless Mouse Operation Remote Control CodeAdjustable Feet Remote Control Battery InstallationRemote Control Receivers and Operating Range Removing the lens InstallationLens Installation Attaching the lens to the projectorPositioning the Projector for PLC-XT25/XT25K/XT21/XT20/XT20K Moving the LensConnecting the AC Power Cord Projector side AC outlet sideConnecting to a Computer Digital and Analog RGB Cables used for connectionConnecting to Video Equipment Video, S-Video Connecting to Video Equipment Component and RGB Scart Selected Input Source and Lamp Control Basic OperationTurning On the Projector PIN Code Input Dialog BoxTurning Off the Projector On-Screen Menu How to Operate the On-Screen MenuRemote Control Menu Bar Information Operating with Projector ControlLens Operation Menu Operation Sound AdjustmentDirect Operation Operating with Remote Control Keystone button Timer buttonNo Show button Input Selection Input Remote Control OperationRemote Control button operation Top Control OperationRGB PC analog RGB Scart RGB PC digital Input Source SelectionInput Menu Video ComponentComponent Video System SelectionVideo or S-Video AV System Menu Video or S-VideoComputer Adjustment Helpful HintsPC System Menu Computer System SelectionSelecting Computer System Manually To store adjustment parameters Auto PC AdjustmentPC Adjust Menu Auto PC AdjManual PC Adjustment To clear the adjusted data To store the adjusted dataMemo Image Mode Selection Image Mode Selection Image MenuImage Adjustment Image Adjustment Image Adjust MenuNoise reduction SharpnessGamma ProgressiveTo reset the adjusted data, select Reset and press Screen Adjustment Keystone Screen AdjustmentScreen Menu Screen Size Adjustment Computer Signals Screen Size Adjustment Video, Component Signals Setting Pointer SettingSetting Menu Language Logo select Logo Logo and Logo PIN code lock settingsLogo Capture CaptureChange the Logo PIN code Change the Logo PIN code lock settingEnter a Logo PIN code Logo PIN code lockRemote control Display On start Power managementPower management Fan control Key lockPIN code lock Change the PIN code lock settingEnter a PIN code Lamp counter Change the PIN codeTest pattern Filter counter Factory defaultFactory default Filter counterMaintenance and Filter Cleaning RecommendationPage Reset the lamp counter Lamp ReplacementReplacement Lamp Type No. POA-LMP105 Service Parts No 330 Model No. of your projectorResetting the Lamp Counter Lamp counterProjector is shut down and all five indicators are blinking Then check the matters belowCleaning the Projection Lens Cleaning the Projector CabinetTroubleshooting AppendixAppendix Information Input Menu TreeInput PC Adjust Screen SettingIndicators and Projector Condition Projector ConditionLamp Replace indicator Or replace the filter see belowCompatible Computer Specifications ON-SCREEN Resolution31.47 59.94 Technical Specifications Accessories Optional PartsPJ Link Notice Terminal Analog RGB Mini D-sub 15 pin Configurations of TerminalsUSB Connector Series B Terminal Mini DIN 8-PINPIN Code Number Memo Logo PIN Code Lock NoDimensions MZ7A-B