Sanyo PLC-XT25K, PLC-XT20L*, PLC-XT20K To reset the adjusted data, select Reset and press

Image Adjustment

Reset
To reset the adjusted data, select Reset and press the		Image Mode Menu
SELECT button. A confirmation box appears and then select
[Yes]. All adjustments will return to their previous figures.		Move the red frame
		pointer to an image
Store		item to be set and
		then press the
To store the adjusted data, select Store and press the		SELECT button.
	Store icon
SELECT button. Use the Point ed buttons to select one
from Image 1 to 4 and press the SELECT button. A
confirmation box appears and then select [Yes]. Stored data
can be called up by selecting an “Image (1–4)” in the Image
Mode Selection on page 44.
Quit
			A confirmation box
Exit the Image Adjust Menu.			appears and then
			select [Yes].

48