Hitachi CP-X600 user manual Using the menu function, Easy Menu, Advanced Menu

Operating

Using the menu function

This projector has the following menus: PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, and EASY MENU. EASY MENU consists of functions often used, and

the other menus are classified into each purpose. Each of these menus is operated using

the same methods. The basic operations of these menus are as follows.

MENU button ENTER button

POSITION

ENTER

	VIDEO	RGB	SEARCH
	ASPECT		AUTO		BLANK
MENU	MAGNIFY	HOME	PAGE UP		VOLUME
	ON
	OFF	END	PAGE DOWN		MUTE
	FREEZE	MY BUTTON1		2 KEYSTONE

Cursor buttons

ESC

RESET button

1. Press the MENU button on the remote control or one of the cursor buttons on the projector.

The Advanced MENU, or EASY MENU that has priority just after powered on, will appear.

In the EASY MENU

2. If you want to change it to the Advanced MENU, select the "Go to Advanced Menu..."

3. Use the cursor buttons ▲/▼ to select an item to operate.

4. Use the cursor buttons◄/► to operate the item.

In the Advanced MENU

2. Use the cursor buttons ▲/▼ to select a menu.

If you want to change it to the EASY MENU, select the

EASY MENU.

Then press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to select an item. The display of the selected menu will be active.

	POSITION	MENU
RESET
	ENTER
	ESC	RESET
/'07=4)$?		5'.'%6
			
2+%674'	$4+)*60'55			
+/#)'	%1064#56			
+0276	)#//#&'(#7.6
5'672	%1.146'/2/+&
#7&+1	%1.14			
5%4''0	6+06			
126+10	5*#420'55
'#5;/'07	#%6+8'+4+567401((
	/;/'/14;5#8'
'#5;/'07=4)$?
#52'%6
#761-';5610'		':'%76'
				
-';5610'				
-';5610'
2+%674'/1&'		014/#.
$4+)*60'55				
				
%1064#56
				
%1.14
				
6+06
				
5*#420'55
9*+52'4		014/#.
/+4414		014/#.
4'5'6
(+.6'46+/'		J
.#0)7#)'		'0).+5*
)QVQ#FXCPEGF/GPW

3. Use the cursor buttons ▲/▼ to select an item to operate.

Then press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. The operation menu of the selected item will appear.

4. Use the cursor buttons▲/▼ to operate the item.

●When you want to reset the operation, press the RESET button on the remote control during the operation. Note that items whose functions are performed simultaneously with operation (ex. LANGUAGE, H PHASE, VOLUME etc.) cannot be reset.

●In the Advanced MENU, when you want to return to the previous display, press the cursor button ◄ on the projector or remote control, or the ESC button on the remote control.

5. Press the MENU button on the remote control again to close the menu and complete this operation. Even if you do not do anything, the dialog will

automatically disappear after about 10 seconds.

●Some functions cannot be performed when a certain input port is selected, or when a certain input signal is displayed.

22