Hitachi CP-X600 user manual Using Security Features, Inputting the Password

Page 46

OPTION Menu

OPTION Menu (continued)

Item

Description

This projector is equipped with security functions.

User registration is required before using the security functions. Please contact your local dealer.

SECURITY

1.Using Security Features

1.1 Inputting the PASSWORD

1.1-1 Use the ▲/▼ buttons on the OPTION menu to select SECURITY and press the ► button. The ENTER PASSWORD box will be displayed. The factory default PASSWORD is 2400. This PASSWORD can be changed (1.2 Changing the PASSWORD).

It is strongly recommended the factory default PASSWORD to be changed as soon as possible.

1.1-2 Use the ▲/▼/◄/► buttons to enter the registered PASSWORD. Move the cursor to the right side of the ENTER PASSWORD BOX and press the ► button to display the SECURITY menu. If an incorrect PASSWORD is input the ENTER PASSWORD BOX will be displayed again. If incorrect PASSWORD is input 3 times the projector will turn off. Afterwards the projector will turn off every time an incorrect PASSWORD is input.

5'%74+6;

'06'42#55914&



37+6 0':6

ENTER PASSWORD BOX

5'%74+6;

5'%74+6;2#55914&%*#0)'



/[5ETGGP2#55914&67401(( 2+0.1%-67401(( 64#05+6+10&'6'%61467401((

SECURITY MENU

1.2 Changing the PASSWORD

5'%74+6;

 

 

1.2-1 Use the ▲/▼ buttons on the SECURITY menu

'06'40'92#55914&

 

 



 

 

to select SECURITY PASSWORD CHANGE

 

 

 

 

 

 

 

and press the ► button to display the ENTER

37+6

0':6

 

NEW PASSWORD BOX.

ENTER NEW PASSWORD

 

BOX

 

 

1.2-2 Use the ▲/▼/◄/► buttons to enter the new

PASSWORD.

1.2-3 Move the cursor to the right side of the ENTER NEW PASSWORD BOX and press the ► button to display the NEW PASSWORD AGAIN BOX, enter the same PASSWORD again.

5'%74+6;

0'92#55914&#)#+0



%#0%'. 1-

NEW PASSWORD AGAIN BOX

1.2-4 Move the cursor to the right side of the NEW PASSWORD AGAIN BOX and press the ► button and the NOTE NEW PASSWORD BOX will be displayed for about 20 seconds, please make note of the PASSWORD during this time. Pressing the ENTER button on the remote controll or INPUT button on the projector will close the NOTE NEW PASSWORD BOX.

• Please do not forget your PASSWORD.

5'%74+6;

016'0'92#55914&



'06'4 ':+6

NOTE NEW PASSWORD BOX

(continued on next page)

46

Image 46
Contents Thank you for purchasing this projector About this manualTrademark acknowledgment Content Contents of package Fastening the lens coverHOT!4 Part namesProjector HOTCB/PB, CR/PR ports 10 Control panelRear panel Audio IN4 R/L ports 10 RGB OUT port 10 Audio OUT port 10Remote control Back Remote controlSetting up Suspended from the ceiling ArrangementOn a horizontal surface DownSecurity bar Anti-theft chain or wire Security slot Adjusting the projectors elevatorUsing the security bar and slot FootConnecting your devices Speakers VCR/DVD playerConnecting your devices About Plug-and-Play capabilityConnecting power supply AC inlet Connector of the power cord to the outletRemote control Putting batteriesFront and top sensors About the remote control signalChanging the frequency of remote control signal Back sensorTurning off the power Power on/offTurning on the power When Auto on in the Option menu is set to Turn OFFOperating Adjusting the volumeSelecting an input signal Temporarily muting the sound For an RGB signal Searching an input signalSelecting an input signal  For no signal For a video signal or s-video signal Adjusting the zoom and focusUsing the automatic adjustment feature  For a component video signalAdjusting the position Correcting the keystone distortionsUsing the magnify feature Freezing the screenTemporarily blanking the screen Easy Menu Using the menu functionAdvanced Menu Easy Menu Easy Menu Picture Menu GammaCustom and then pressing the button or Using the / buttons switches the color temperature modePicture Menu Color TempMY Memory Active IrisLOAD1, LOAD2, LOAD3, LOAD4 SAVE1, SAVE2, SAVE3, SAVE4Image Menu For an RGB signalFor no signal Over ScanImage Menu PhaseAuto Adjust Size3D-YCS Input MenuProgressive Color SpaceComponent Input MenuVideo Format Frame Lock Resolution Custom Resolution BOXFunction may not work correctly Setup MenuSome input, this function may not work well Function may not work wellSetup Menu Speaker VolumeAudio Menu AudioScreen Menu Using the /// buttons adjusts the menu positionUsing the / buttons switches the mode for the blank screen Or keep no operation for about 10 secondsScreen Menu Start UPMyScreen Capturing error has occurred. Please try againMyScreen registration is finished Message Auto Search Option MenuAuto on Auto OFF Option MenuLamp Time MY Button ServiceFAN Speed Ghost Filter MessageRemote Receiv Factory ResetKEY Lock Remote FreqInputting the Password Using Security FeaturesSecurity Turning on the MyScreen Password Using the MyScreen Password FunctionDescription If you have forgotten your Password Setting the PasswordTurning the Password off Using the PIN Lock FunctionRegistering the PIN Code Turning Off the PIN Lock Function If you have forgotten your PIN CodeSetting the Transition Detector Password Using the Transition Detector FunctionTurning On the Transition Detector Function Setting the Transition Detector off SecurityLamp MaintenanceCase of replacement by yourself Type number = DT00771 Replacing the lampLamp Type number = MU03642 Cleaning the air filter Air filterAir filter Page Internal temperature is rising TroubleshootingThere is no input signal Related messagesRegarding the indicator lamps Regarding the indicator lamps Signal cables are not correctly connected Electrical power cord is not pluggedPower switch is not set to the on position Signal source does not correctly workColor settings are not correctly adjusted Volume is adjusted to an extremely low levelAudio setting is not correct Color Space setting is not suitableWhisper function is working Not properly adjustedEither the focus and/or horizontal phase settings are Lamp is approaching the end of its product LifetimeWarranty and after-service SpecificationSpecifications