Hitachi CP-X600 user manual Easy Menu

Page 24

EASY Menu

EASY Menu (continued)

Item

Description

BRIGHTNESS

Using the ◄/► buttons adjusts the brightness.

See the BRIGHTNESS item in PICTURE menu (25).

 

CONTRAST

Using the ◄/► buttons adjusts the contrast.

See the CONTRAST item in PICTURE menu (25).

 

COLOR

Using the ◄/► buttons adjusts the strength of whole color.

See the COLOR item in PICTURE menu (26).

 

TINT

Using the ◄/► buttons adjusts the tint.

See the TINT item in PICTURE menu (26).

 

SHARPNESS

Using the ◄/► buttons adjusts the sharpness.

See the SHARPNESS item in PICTURE menu (26).

 

WHISPER

Using the ◄/► buttons turns off/on the whisper mode.

See the WHISPER item in SETUP menu (35).

 

MIRROR

Using the ◄/► buttons switches the mode for mirror status.

See the MIRROR item in SETUP menu (35).

 

 

Performing this item resets all of the EASY MENU items except the

RESET

FILTER TIME and LANGUAGE.

A dialog is displayed for confirmation. Selecting the RESET using

 

 

the ▲ button performs resetting.

 

Performing this item resets the filter time which counts usage time

 

of the air filter.

FILTER TIME

A dialog is displayed for confirmation. Selecting the RESET using

 

the ▲ button performs resetting.

See the FILTER TIME item in OPTION menu (42).

LANGUAGE

Using the ◄/► buttons changes the display language.

See the LANGUAGE item in SCREEN menu (37).

 

Go to

Select “Go to Advanced Menu…” on the menu, and press the ►

or ENTER button to use the menu of PICTURE, IMAGE, INPUT,

Advanced Menu...

SETUP, AUDIO, SCREEN or OPTION.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents About this manual Thank you for purchasing this projectorTrademark acknowledgment Content Contents of package Fastening the lens coverPart names ProjectorHOT!4 HOTControl panel Rear panelCB/PB, CR/PR ports 10 Audio IN4 R/L ports 10 RGB OUT port 10 Audio OUT port 10Remote control Back Remote controlSetting up Arrangement On a horizontal surfaceSuspended from the ceiling DownAdjusting the projectors elevator Using the security bar and slotSecurity bar Anti-theft chain or wire Security slot FootConnecting your devices Speakers VCR/DVD playerConnecting your devices About Plug-and-Play capabilityConnecting power supply AC inlet Connector of the power cord to the outletRemote control Putting batteriesAbout the remote control signal Changing the frequency of remote control signalFront and top sensors Back sensorPower on/off Turning on the powerTurning off the power When Auto on in the Option menu is set to Turn OFFAdjusting the volume Selecting an input signalOperating Temporarily muting the soundSearching an input signal Selecting an input signal For an RGB signal  For no signalAdjusting the zoom and focus Using the automatic adjustment feature For a video signal or s-video signal  For a component video signalAdjusting the position Correcting the keystone distortionsUsing the magnify feature Freezing the screen Temporarily blanking the screen Using the menu function Easy MenuAdvanced Menu Easy Menu Easy Menu Picture Menu GammaUsing the / buttons switches the color temperature mode Picture MenuCustom and then pressing the button or Color TempActive Iris LOAD1, LOAD2, LOAD3, LOAD4MY Memory SAVE1, SAVE2, SAVE3, SAVE4For an RGB signal For no signalImage Menu Over ScanPhase Auto AdjustImage Menu SizeInput Menu Progressive3D-YCS Color SpaceInput Menu ComponentVideo Format Frame Lock Resolution Custom Resolution BOXSetup Menu Some input, this function may not work wellFunction may not work correctly Function may not work wellSetup Menu Volume Audio MenuSpeaker AudioUsing the /// buttons adjusts the menu position Using the / buttons switches the mode for the blank screenScreen Menu Or keep no operation for about 10 secondsScreen Menu Start UPCapturing error has occurred. Please try again MyScreenMyScreen registration is finished Message Option Menu Auto SearchAuto on Option Menu Auto OFFLamp Time Service MY ButtonFAN Speed Ghost Filter MessageFactory Reset KEY LockRemote Receiv Remote FreqUsing Security Features Inputting the PasswordSecurity Using the MyScreen Password Function Description If you have forgotten your PasswordTurning on the MyScreen Password Setting the PasswordUsing the PIN Lock Function Turning the Password offRegistering the PIN Code Turning Off the PIN Lock Function If you have forgotten your PIN CodeUsing the Transition Detector Function Setting the Transition Detector PasswordTurning On the Transition Detector Function Setting the Transition Detector off SecurityMaintenance Case of replacement by yourselfLamp Type number = DT00771 Replacing the lampLamp Type number = MU03642 Cleaning the air filter Air filterAir filter Page Troubleshooting There is no input signalInternal temperature is rising Related messagesRegarding the indicator lamps Regarding the indicator lamps Electrical power cord is not plugged Power switch is not set to the on positionSignal cables are not correctly connected Signal source does not correctly workVolume is adjusted to an extremely low level Audio setting is not correctColor settings are not correctly adjusted Color Space setting is not suitableNot properly adjusted Either the focus and/or horizontal phase settings areWhisper function is working Lamp is approaching the end of its product LifetimeWarranty and after-service SpecificationSpecifications
Top Page Image Contents