Hitachi CP-X600 user manual MY Button, Service, FAN Speed

OPTION Menu

OPTION Menu (continued)

Item	Description
	This item is to assign one of the following function to MY BUTTON
	1 and 2 on the remote control (6).
	Choose 1 or 2 on the MY BUTTON menu using the ◄/► button
	first. Then using the ▲/▼ buttons sets one of the following functions
	to the chosen button.
	• RGB1: Sets port to RGB1.
	• RGB2: Sets port to RGB2.
	• COMPONENT: Sets port to COMPONENT (Y, Cb/Pb, Cr/Pr).
	• S-VIDEO: Sets port to S-VIDEO.
	• VIDEO: Sets port to VIDEO.
	• INFORMATION: Displays a dialog of INPUT INFORMATION (45).
	• AUTO KEYSTONE EXECUTE:
	Performs automatic keystone distortion correction (34).
	• MY MEMORY:
MY BUTTON	Loads one of adjustment data stored (27).
	• When the current adjustment is not saved to memory a dialog is displayed.
	6GORQTCT[EQPFKVKQP
	/'/14;4GECNNUCXGFRCTCOGVGTU	0QUCXGFFCVC
	3WKV
	If you want to keep the current adjustment, please press the ◄
	button to quit. Otherwise the current adjusted condition will be lost
	by loading a data.

•PICTURE MODE: Changes the PICTURE MODE (23).

•FILTER RESET:

Displays the filter time reset confirmation dialogue (42).

•ACTIVE IRIS: Changes the active iris mode.

•VOLUME+: Set the volume up.

•VOLUME-: Set the volume down.

Selecting this item displays the SERVICE menu.

Select an item using the ▲/▼ buttons, and press the ► button or the ENTER button on the remote control to execute the item.

FAN SPEED AUTO ADJUST GHOST FILTER MESSAGE KEY LOCK

SERVICE	FACTORY RESET INFORMATION REMOTE FREQ. REMOTE RECEIV.
	FAN SPEED
	Using the ▲/▼ buttons switches the rotation speed	(#052''&
	of the cooling fans. The HIGH is the mode for use at	*+)*
	highlands etc. Note that the projector is noisier when	014/#.
	the HIGH is selected.
	HIGH ó NORMAL

(continued on next page)

43