Hitachi CP-X600 user manual Ghost, Filter Message

Page 44

OPTION Menu

OPTION Menu (continued)

Item

Description

 

 

AUTO ADJUST

 

 

Using the ▲/▼ buttons enables/disables the

#761#&,756

 

automatic adjustment.When DISABLE is selected,

'0#$.'

 

the automatic adjustment feature is disabled,

&+5#$.'

 

although rough adjustment is automatically performed

 

 

depending on the basic setting.

 

ENABLE ó DISABLE

•Depending on conditions, such as input image, signal cable to the projector, environment around the projector, etc., the automatic adjustment may not work correctly. In such a case, please choose DISABLE to disable the automatic adjustment, and make adjustment manually.

 

GHOST

 

 

 

 

1. Select a color element of ghost using the ◄/►

4

)

$

 

 

 

 

 

buttons.

 



 

 

 

 

 

2. Adjust the selected element using the ▲/▼ buttons to

 

)*156

 

 

 

 

SERVICE

disappear ghost.

 

 

 

FILTER MESSAGE

 

 

 

 

 

 

 

 

Use the ▲/▼ button to set the timer for the interval to

(+.6'4/'55#)'

 

show the message for cleaning up the air filter.

 

 

J

 

50h ó 100h ó 200h ó 300h ó TURN OFF

 

 

 

J

 

After selecting “50h”, “100h”, “200h”, or “300h”, the

 

J

 

 

J

 

message “REMINDER *** HRS PASSED AFTER THE

 

 

 

67401((

 

LAST FILTER CHECK” will appear after the timer

 

 

 

 

reaches the interval time set by the menu. (57)

 

 

 

 

When the “TURN OFF” is chosen, the air filter

 

 

 

 

cleaning message will not appear.

 

 

 

•Please check and clean the air filter periodically, even if there is no message. If the air filter becomes to be blocked by dust or others, the internal temperature will rise, which could cause malfunction, or reduce the lifetime of the projector.

•It is recommended to choose “100h” in general. Please be careful with the operating environment of the projector and the condition of the air filter, especially when the “200h”, “300h” or “TURN OFF” is chosen.

(continued on next page)

44

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Trademark acknowledgment About this manualThank you for purchasing this projector Content Contents of package Fastening the lens coverPart names ProjectorHOT!4 HOTControl panel Rear panelCB/PB, CR/PR ports 10 Audio IN4 R/L ports 10 RGB OUT port 10 Audio OUT port 10Remote control Back Remote controlSetting up Arrangement On a horizontal surfaceSuspended from the ceiling DownAdjusting the projectors elevator Using the security bar and slotSecurity bar Anti-theft chain or wire Security slot FootConnecting your devices Speakers VCR/DVD playerConnecting your devices About Plug-and-Play capabilityConnecting power supply AC inlet Connector of the power cord to the outletRemote control Putting batteriesAbout the remote control signal Changing the frequency of remote control signalFront and top sensors Back sensorPower on/off Turning on the powerTurning off the power When Auto on in the Option menu is set to Turn OFFAdjusting the volume Selecting an input signalOperating Temporarily muting the soundSearching an input signal Selecting an input signal For an RGB signal  For no signalAdjusting the zoom and focus Using the automatic adjustment feature For a video signal or s-video signal  For a component video signalAdjusting the position Correcting the keystone distortionsUsing the magnify feature Freezing the screenTemporarily blanking the screen Advanced Menu Using the menu functionEasy Menu Easy Menu Easy Menu Picture Menu GammaUsing the / buttons switches the color temperature mode Picture MenuCustom and then pressing the button or Color TempActive Iris LOAD1, LOAD2, LOAD3, LOAD4MY Memory SAVE1, SAVE2, SAVE3, SAVE4For an RGB signal For no signalImage Menu Over ScanPhase Auto AdjustImage Menu SizeInput Menu Progressive3D-YCS Color SpaceVideo Format Input MenuComponent Frame Lock Resolution Custom Resolution BOXSetup Menu Some input, this function may not work wellFunction may not work correctly Function may not work wellSetup Menu Volume Audio MenuSpeaker AudioUsing the /// buttons adjusts the menu position Using the / buttons switches the mode for the blank screenScreen Menu Or keep no operation for about 10 secondsScreen Menu Start UPMyScreen registration is finished Capturing error has occurred. Please try againMyScreen Message Auto on Option MenuAuto Search Lamp Time Option MenuAuto OFF FAN Speed ServiceMY Button Ghost Filter MessageFactory Reset KEY LockRemote Receiv Remote FreqSecurity Using Security FeaturesInputting the Password Using the MyScreen Password Function Description If you have forgotten your PasswordTurning on the MyScreen Password Setting the PasswordRegistering the PIN Code Using the PIN Lock FunctionTurning the Password off Turning Off the PIN Lock Function If you have forgotten your PIN CodeTurning On the Transition Detector Function Using the Transition Detector FunctionSetting the Transition Detector Password Setting the Transition Detector off SecurityMaintenance Case of replacement by yourselfLamp Type number = DT00771 Replacing the lampLamp Type number = MU03642 Cleaning the air filter Air filterAir filter Page Troubleshooting There is no input signalInternal temperature is rising Related messagesRegarding the indicator lamps Regarding the indicator lamps Electrical power cord is not plugged Power switch is not set to the on positionSignal cables are not correctly connected Signal source does not correctly workVolume is adjusted to an extremely low level Audio setting is not correctColor settings are not correctly adjusted Color Space setting is not suitableNot properly adjusted Either the focus and/or horizontal phase settings areWhisper function is working Lamp is approaching the end of its product LifetimeWarranty and after-service SpecificationSpecifications
Top Page Image Contents