Hitachi CP-X600 user manual MyScreen registration is finished

Page 39

SCREEN Menu

SCREEN Menu (continued)

Item

Description

This item allows you to capture an image for use as a MyScreen

image which can be used as the BLANK screen and START UP

screen. Display the image you want to capture before executing the

following procedure.

1. Selecting this item displays a dialog

/[5ETGGP

titled “MyScreen”. It will ask you if

&Q[QWUVCTVECRVWTKPIVJKURKEVWTG!

you start capturing an image from the

'5% 01'06 ;'5

current screen.

Please wait for the target image to be displayed, and press

the ENTER button on the remote control when the image is

displayed. The image will freeze and the frame for capturing will

appear.

To stop performing, press the RESET or ESC button on the

remote control.

2. Using the ▲/▼/◄/► buttons adjusts

the frame position.

MyScreen

Please move the frame to the position

of the image which you want to use. The

/[5ETGGP

/QXGVJGECRVWTGCTGC

frame may not be able to be moved for

CU[QWYCPV

4'5'6

4'6740'06'4 0':6

some input signals.

/[5ETGGP

To start registration, press the ENTER

button on the remote control.

To restore the screen and return to the previous dialog, press the

RESET or ESC button on the remote control.

Registration takes several minutes.

When the registration is completed, the registered screen and the

following message is displayed for several seconds:

“MyScreen registration is finished.”

If the registration failed, the following message is displayed:

“A capturing error has occurred. Please try again.”

•This function cannot be selected when the TURN ON is selected to the MyScreen Lock item (below).

•This function cannot be selected when the TURN ON is selected to the MyScreen PASSWARD of SECURITY item in OPTION menu (47).

Using the ▲/▼ buttons turns on/off the MyScreen lock function.

TURN ON ó TURN OFF

When the TURN ON is selected, the item MyScreen is locked. Use MyScreen Lock this function for protecting the current MyScreen.

•This function cannot be selected when the TURN ON is selected to the MyScreen PASSWARD of SECURITY item in OPTION menu (47).

(continued on next page)

39

Image 39

Contents About this manual Thank you for purchasing this projectorTrademark acknowledgment Content Fastening the lens cover Contents of packageHOT Part namesProjector HOT!4Audio IN4 R/L ports 10 RGB OUT port 10 Audio OUT port 10 Control panelRear panel CB/PB, CR/PR ports 10Back Remote control Remote controlSetting up Down ArrangementOn a horizontal surface Suspended from the ceilingFoot Adjusting the projectors elevatorUsing the security bar and slot Security bar Anti-theft chain or wire Security slotSpeakers VCR/DVD player Connecting your devicesAbout Plug-and-Play capability Connecting your devicesAC inlet Connector of the power cord to the outlet Connecting power supplyPutting batteries Remote controlBack sensor About the remote control signalChanging the frequency of remote control signal Front and top sensorsWhen Auto on in the Option menu is set to Turn OFF Power on/offTurning on the power Turning off the powerTemporarily muting the sound Adjusting the volumeSelecting an input signal Operating For no signal Searching an input signalSelecting an input signal  For an RGB signal For a component video signal Adjusting the zoom and focusUsing the automatic adjustment feature  For a video signal or s-video signalCorrecting the keystone distortions Adjusting the positionFreezing the screen Using the magnify featureTemporarily blanking the screen Using the menu function Easy MenuAdvanced Menu Easy Menu Easy Menu Gamma Picture MenuColor Temp Using the / buttons switches the color temperature modePicture Menu Custom and then pressing the button orSAVE1, SAVE2, SAVE3, SAVE4 Active IrisLOAD1, LOAD2, LOAD3, LOAD4 MY MemoryOver Scan For an RGB signalFor no signal Image MenuSize PhaseAuto Adjust Image MenuColor Space Input MenuProgressive 3D-YCSInput Menu ComponentVideo Format Frame Lock Custom Resolution BOX ResolutionFunction may not work well Setup MenuSome input, this function may not work well Function may not work correctlySetup Menu Audio VolumeAudio Menu SpeakerOr keep no operation for about 10 seconds Using the /// buttons adjusts the menu positionUsing the / buttons switches the mode for the blank screen Screen MenuStart UP Screen MenuCapturing error has occurred. Please try again MyScreenMyScreen registration is finished Message Option Menu Auto SearchAuto on Option Menu Auto OFFLamp Time Service MY ButtonFAN Speed Filter Message GhostRemote Freq Factory ResetKEY Lock Remote ReceivUsing Security Features Inputting the PasswordSecurity Setting the Password Using the MyScreen Password FunctionDescription If you have forgotten your Password Turning on the MyScreen PasswordUsing the PIN Lock Function Turning the Password offRegistering the PIN Code If you have forgotten your PIN Code Turning Off the PIN Lock FunctionUsing the Transition Detector Function Setting the Transition Detector PasswordTurning On the Transition Detector Function Security Setting the Transition Detector offType number = DT00771 Replacing the lamp MaintenanceCase of replacement by yourself LampLamp Air filter Type number = MU03642 Cleaning the air filterAir filter Page Related messages TroubleshootingThere is no input signal Internal temperature is risingRegarding the indicator lamps Regarding the indicator lamps Signal source does not correctly work Electrical power cord is not pluggedPower switch is not set to the on position Signal cables are not correctly connectedColor Space setting is not suitable Volume is adjusted to an extremely low levelAudio setting is not correct Color settings are not correctly adjustedLamp is approaching the end of its product Lifetime Not properly adjustedEither the focus and/or horizontal phase settings are Whisper function is workingSpecification Warranty and after-serviceSpecifications