Message Formats | Property Management System - Communication Interface |
Note 3: In the case of messages that are almost identical, the FC will be marked with “**”. Also, differing FTC values will be marked with “*”. The final message is then constructed by simply inserting the desired FC value (and, if necessary, the desired FTC value).
All messages in this section have been previously defined in NEAX2400 IMS Hotel System PMS Interface Specification (except for one Maid Status message, which is so noted). The versions supported are Model 60 and Model 90; Model 120 messages are not supported. Any message that is intended to work with only one version is so designated; any message that is intended to work with both has no special designation.
The Feature Codes used are as follows:
•70
•11, 12, 51, 52
•13, 53
•15
•16
•56
•19
•20
•21, 61
•17
•17
•57
•59
•62
Data Link Maintenance
These messages are used by the NEAX and the PMS to maintain the data link between them. The messages are as follows:
•
•
•
•
•
•
•
•
Page 32 |
|