NEC NDA-30115-001 manual 02H ‘1’ ‘!’ ‘L’ ‘1’ ‘5’ ‘1’ ‘4’ Extension Code, Blank 03H

Message Formats Property Management System - Communication Interface

Restriction Control

There are two messages. They are identical, except that message 15-1 is sent from the PMS to the NEAX, and message 15-2 is sent by the NEAX to the PMS. These messages simply communicate a new restriction code for an extension. These messages are used by both the Model 60 and the Model 90 version.

0 1 2 3 4 6 8 9 15

02H

‘1’

‘!’

‘L’

‘1’ ‘5’

‘1’ ‘4’

** Extension

Code

STX SA UA EI	FTC	MSC FC	6	1
16	18	19

Blank

03H

xx

2ETX BCC

**Multiple Function Codes use this message. See below.

Figure 4-9 Restriction Control

Message fields are:

•FC-- There are two functions: (FTC-FC)

•15-1 -- Originated from the PMS.

•15-2 -- Originated from the NEAX.

•Extension -- Extension number. If the extension number is less than six digits, left justify the number and fill the remaining bytes with space (20H) characters.

•Code -- Restriction code for this extension. The possible codes are:

•0 -- Do Not Disturb and Room Cut-Off are cancelled.

•1 -- Room Cut-Off is set, Do Not Disturb is cancelled.

•5 -- Do Not Disturb is set, Room Cut-Off is cancelled.

•6 -- Do Not Disturb and Room Cut-Off are set.

•Blank -- Field contains two space (20H) characters.

Page 40 NDA-30115 Revision 1.0