Message Formats | Property Management System - Communication Interface |
Extension Connection
These messages are used to associate extensions. This association will be either in the form of a Boss/Secretary or of a Master/Secondary. In either case, both of the rooms to be connected must be checked in. There may only be one Secretary for each Boss, but a Secretary may be assigned to multiple Bosses. A Master and Secondary may only be assigned on a one to one basis.
The Extension Connection messages use the following Function Codes:
•
•
•
•
Guest Room
Secretary
Telephone
0 | 1 | 2 | 3 | 4 | 6 | 8 | 9 | 15 | 21 | 22 |
02H
‘1’
‘!’
‘L’
‘6’ ‘2’
‘1’ ‘7’
**
Boss
Secty
03H
xx
STX SA UA EI | FTC | MSC FC | 6 | 6 | ETX BCC |
** Multiple Function Codes use this message. See below.
Figure 4-57 Guest Room Secretary Telephone
The message fields are:
•FC
•
•
•Boss
•Secty
•To cancel, completely fill with space (20H) characters.
•To set, specify the secretary’s extension, and it is now associated with the boss’s extension. If the extension number is less than six digits, left justify the number and fill the remaining bytes with space (20H) characters.
Page 84 |
|