NEC NDA-30115-001 manual Room Image Set, 02H ‘1’ ‘!’ ‘L’ ‘1’ ‘7’ ‘2’ ‘8’ Extension Vacancy

Property Management System - Communication Interface Message Formats

Room Image Set 1

0 1 2 3 4 6 8 9 15

02H ‘1’

‘!’

‘L’

‘1’ ‘7’

‘2’ ‘8’

**

Extension

Vacancy

STX SA UA EI	FTC	MSC FC	6	1
16	17	18	32	33

Status

Code

Blank

03H

xx

1 1 14 ETX BCC

** Multiple Function Codes use this message. See below.

Figure 4-47 Room Image Set 1

The message fields are:

•FC -- Function Codes that use this message format are: (FTC-FC)

•17-1 -- Room Image Set 1 (Normal Request from PMS)

•17-2 -- Room Image Set 1 (Normal Answer from NEAX)

•17-3 -- Room Image Set 1 (Recovery Request from PMS)

•17-4 -- Room Image Set 1 (Recovery Answer from NEAX)

•Extension -- Extension number. If the extension number is less than six digits, left justify the number and fill the remaining bytes with space (20H) characters.

•Vacancy -- Vacancy/Occupancy flag. The possible values are:

•0 -- Vacant.

•1 -- Occupied.

•Status - Message Waiting status. The possible values are:

•0 -- Message Waiting Lamp is off.

•1 -- Message Waiting Lamp is on.

•Code -- Restriction code for this extension. The possible codes are:

•0 -- Do Not Disturb and Room Cut-Off are cancelled.

•1 -- Room Cut-Off is set, Do Not Disturb is cancelled.

•5 -- Do Not Disturb is set, Room Cut-Off is cancelled.

•6 -- Do Not Disturb and Room Cut-Off are set.

•Blank -- Field contains 14 space (20H) characters.

NDA-30115 Revision 1.0 Page 73