Kodak ATS, KKE PLUS, B Replacing the Lamp Module Receptacle, Installing the Lamp Module Receptacle

Page 11

Replacements and Installations

Replacing the LAMP MODULE RECEPTACLE

SCREW (2)

PRE-HEAT DUCT

SCREW (2)

LOWER LIGHT BAFFLE

LAMP MODULE

RECEPTACLE

BLOWER COVER

ASSEMBLY

A100_0016HCA

A100_0016HA

SCREW (not shown)

Warning

Dangerous Voltage

[1]Disconnect the main power.

[2]Do the replacement procedure for the LOWER HOUSING ASSEMBLY.

[3]Cut and remove the necessary WIRE TIES.

[4]Remove the 2 Torx SCREWS on the left side of the LOWER LIGHT BAFFLE ASSEMBLY.

[5]Loosen the Torx SCREW on the right side of the LOWER LIGHT BAFFLE ASSEMBLY approximately 1/2 way.

[6]Lift and remove the LOWER LIGHT BAFFLE ASSEMBLY.

[7]Lift the GRILLE ASSEMBLY up.

[8]Remove the 2 long Torx from the BLOWER COVER ASSEMBLY.

[9]Lift the BLOWER COVER ASSEMBLY up.

[10]Lift and move the PREHEAT DUCT up.

[11]To remove the LAMP MODULE RECEPTACLE from the PREHEAT DUCT, compress the 2 TABS on the LAMP MODULE RECEPTACLE.

Installing the LAMP MODULE RECEPTACLE

Warning

Dangerous Voltage

[1]Disconnect the main power.

[2]Do the replacement procedure for the LAMP MODULE RECEPTACLE in reverse order.

SM4530-1 – 30APR96

11

Image 11

Contents For Table of Contents PIN Special Application Plug Adjusting the Focus Light Path Auto Focus ModelsInstalling the Lower Housing Assembly Replacing the Lower Housing AssemblyRemove the Torx Screw from the Blower Cover Assembly Replacing the FAN Shaft AssemblyPainted Projector Replacing the Motor Installing the FAN Shaft AssemblyMotor Installing the MotorReplacing the Worm Pulley and Mechanism Belt Worm Pulley Screw Mechanism BeltReplacing the Thermal Fuse Assembly Installing the Worm Pulley and Mechanism BeltInstalling the Thermal Fuse Assembly Replacing the Lamp Module Receptacle Installing the Lamp Module ReceptaclePulley Shaft Replacing the Cycle Solenoid AssemblyInstalling the Cycle Solenoid Assembly Plunger AssemblyDark Replacing the Mechanism AssemblyMechanism Assembly Worm Pulley Auto Focusscrew Cyclebracket Solenoid Assembly Installing the Mechanism AssemblyReplacing the AUTO-FOCUS Bracket Assembly Installing the AUTO-FOCUS Bracket AssemblyReplacing the CAM Stack Assembly and Cycle Lever Assembly Remove the Light Baffle Installing the CAM Stack Assembly and Cycle Lever Assembly Installing the Lamp Socket Terminal Assembly Replacing the Lamp Socket Terminal ASSEMBLY, N.PRetaining Ring Spring Washer Socket PIN Replacing the Lamp Socket Terminal ASSEMBLY, Painted ModelsLamp Module AUTO-FOCUS Defeat Switch Replacing the Lens Mount Assembly Auto Focus ModelInstalling the Lens Mount Assembly Auto Focus Models Installing the Lens Mount Assembly Non Auto Focus Model Replacing the Lens Mount Assembly Non Auto Focus ModelInstalling the AUTO-FOCUS Switch Assembly Replacing the AUTO-FOCUS Switch AssemblySpring Replacing the Focus Shaft Assembly Auto Focus ModelsLens Mount Assembly Clamp Lever ScrewFocus Shaft Spring Assembly Focus Motor Bracket Spacer Installing the Focus Shaft AssemblyReplacing the Focus Shaft Assembly Non Auto-Focus Models Installing the Focus Shaft Assembly Mechanism Assembly BAR Cycle Adjustment SpeciﬁcationAdjusting the Cycle Solenoid Adjusting the Indexer Lever Assembly Slide Lift Lever Guage TL-3001 Select Adjusting the Slide Lift Lever ManualAdjusting the Slide Lift Lever Power Zero Position Switch NUT Adjusting the Zero Position SwitchAUTO-FOCUS Target Slide TL-3002 Adjusting the Focus Light Path Auto Focus ModelsAdjustment Tool Spring Hook TL-1165 Auto Focus Bracket AssemblyTarget Slide Adjusting the NullProjection TAB Lens AUTO-FOCUS Adjusting the Photocell Clamp PAD AUTO-FOCUS Assembly Target SlidePAD Screw NUT Clamp PAD Assembly Adjusting the Clamp PAD AssemblyDark Shutter Pressure PAD Adjusting the Dark ShutterFAN Worm Pulley Assembly CAM Stack Assembly Cycle LeversA0910023HA A0910022DA Super Lube Adjustment T-BARAUTO-FOCUS Gauge AUTO-FOCUS Target SlideSpecifications Ground PIN Remote ControlPIN Special Applications Main Motor Voltages DiagnosticsForward Tray Cycle Zero Position SwitchShutter Switch Photocell VoltagesPIN Remote Cord Plug Voltages Kodak EC-3 Remote ControlSmall Component Board Assembly 256809 Voltages Voltage Speciﬁcations General Parts Power, Illumination, and Cooling MalfunctionsCycle Lever Slide Transport MalfunctionsControl Super Lube TL-4276Direction Lever Lever AssemblyPower Slide Lift Lever EccentricsSwitch Focus Malfunctions Board Gate MechanismCheck that the alignment of the Target Eastman Kodak Company

Related manuals

Manual 54 pages 32.2 Kb