Kodak BR, KKE PLUS Replacing the Cycle Solenoid Assembly, Installing the Cycle Solenoid Assembly

Page 12

SERVICE MANUAL

Replacing the CYCLE SOLENOID ASSEMBLY

CYCLE SOLENOID

Warning

Dangerous Voltage

[1] Disconnect the main power.

[2] Do the replacement procedures for the LOWER HOUSING ASSEMBLY and the MOTOR.

SCREW (2)[3] Cut and remove the necessary WIRE TIES.

[4] Disconnect the 2 wires from the CYCLE SOLENOID on the SMALL CIRCUIT BOARD.

	CYCLE	[5]	Pull the SMALL CIRCUIT BOARD up.
	SOLENOID	[5]	Pull the SMALL CIRCUIT BOARD up.
	SOLENOID	[6]	Remove the Torx SCREW (for N.P. models) (or
	PLUNGER	[6]	Remove the Torx SCREW (for N.P. models) (or
			Hex SCREW for Painted Models) from the WORM
			PULLEY SHAFT.
		[7]	Move the TAB on the WORM PULLEY
			ASSEMBLY out of the MECHANISM ASSEMBLY.
		[8]	Lift and remove the WORM PULLEY ASSEMBLY.
		[9]	Remove the 2 Torx 1/4 in. SCREWS from the 2
			CYCLE SOLENOID GROMMETS.
		[10]	Pull the CYCLE SOLENOID ASSEMBLY up and
			out.
		[11]	If necessary, remove the CYCLE SOLENOID
		A100_0017GCA	PLUNGER ASSEMBLY.
		A100_0017GCA

A100_0017GA

Installing the CYCLE SOLENOID ASSEMBLY

Important

Do the adjustment for the CYCLE SOLENOID ASSEMBLY. See the Adjustments section.

[1]Do the replacement procedure for the CYCLE SOLENOID ASSEMBLY in reverse order.

12	30APR96 – SM4530-1

Image 12

Contents For Table of Contents Adjusting the Focus Light Path Auto Focus Models PIN Special Application PlugReplacing the Lower Housing Assembly Installing the Lower Housing AssemblyReplacing the FAN Shaft Assembly Remove the Torx Screw from the Blower Cover AssemblyPainted Projector Installing the FAN Shaft Assembly Replacing the MotorInstalling the Motor Replacing the Worm Pulley and Mechanism BeltWorm Pulley Screw Mechanism Belt MotorInstalling the Worm Pulley and Mechanism Belt Replacing the Thermal Fuse AssemblyInstalling the Thermal Fuse Assembly Installing the Lamp Module Receptacle Replacing the Lamp Module ReceptacleReplacing the Cycle Solenoid Assembly Installing the Cycle Solenoid AssemblyPlunger Assembly Pulley ShaftReplacing the Mechanism Assembly Mechanism AssemblyDark Installing the Mechanism Assembly Replacing the AUTO-FOCUS Bracket AssemblyInstalling the AUTO-FOCUS Bracket Assembly Worm Pulley Auto Focusscrew Cyclebracket Solenoid AssemblyReplacing the CAM Stack Assembly and Cycle Lever Assembly Remove the Light Baffle Installing the CAM Stack Assembly and Cycle Lever Assembly Replacing the Lamp Socket Terminal ASSEMBLY, N.P Installing the Lamp Socket Terminal AssemblyReplacing the Lamp Socket Terminal ASSEMBLY, Painted Models Lamp ModuleRetaining Ring Spring Washer Socket PIN Replacing the Lens Mount Assembly Auto Focus Model Installing the Lens Mount Assembly Auto Focus ModelsAUTO-FOCUS Defeat Switch Replacing the Lens Mount Assembly Non Auto Focus Model Installing the Lens Mount Assembly Non Auto Focus ModelReplacing the AUTO-FOCUS Switch Assembly Installing the AUTO-FOCUS Switch AssemblyReplacing the Focus Shaft Assembly Auto Focus Models Lens Mount AssemblyClamp Lever Screw SpringInstalling the Focus Shaft Assembly Replacing the Focus Shaft Assembly Non Auto-Focus ModelsFocus Shaft Spring Assembly Focus Motor Bracket Spacer Installing the Focus Shaft Assembly Adjustment Speciﬁcation Adjusting the Cycle SolenoidMechanism Assembly BAR Cycle Adjusting the Indexer Lever Assembly Adjusting the Slide Lift Lever Manual Slide Lift Lever Guage TL-3001 SelectAdjusting the Slide Lift Lever Power Adjusting the Zero Position Switch Zero Position Switch NUTAdjusting the Focus Light Path Auto Focus Models Adjustment ToolSpring Hook TL-1165 Auto Focus Bracket Assembly AUTO-FOCUS Target Slide TL-3002Adjusting the Null Projection TAB Lens AUTO-FOCUSTarget Slide Adjusting the Photocell AUTO-FOCUS Assembly Target Slide PADClamp PAD Adjusting the Clamp PAD Assembly Screw NUT Clamp PAD AssemblyAdjusting the Dark Shutter Dark Shutter Pressure PADWorm Pulley Assembly CAM Stack Assembly Cycle Levers FANA0910023HA A0910022DA Adjustment T-BAR AUTO-FOCUS GaugeAUTO-FOCUS Target Slide Super LubeSpecifications PIN Remote Control PIN Special ApplicationsGround Diagnostics Main Motor VoltagesZero Position Switch Shutter SwitchPhotocell Voltages Forward Tray CycleKodak EC-3 Remote Control PIN Remote Cord Plug VoltagesSmall Component Board Assembly 256809 Voltages Power, Illumination, and Cooling Malfunctions Voltage Speciﬁcations General PartsSlide Transport Malfunctions ControlSuper Lube TL-4276 Cycle LeverLever Assembly Power Slide Lift LeverEccentrics Direction LeverSwitch Focus Malfunctions Gate Mechanism BoardCheck that the alignment of the Target Eastman Kodak Company

Related manuals

Manual 54 pages 32.2 Kb