Kodak BR, KKE PLUS, KKA, JAMT, J-E PLUS, E-PLUS SLIDE, ATS service manual Focus Malfunctions, Motor

Diagnostics

Focus Malfunctions

Malfunction		Check
No manual focus	1. Check the FOCUS SHAFT SPRING for the
		correct tension.
	2.	Check the LENS SUPPORT SPRING for
		correct tension.
	3.	Check the LENS DRIVE GEAR on the
		FOCUS SHAFT ASSEMBLY for damage
		and install a new part if necessary.
No remote focus (Non Auto Focus models)	1. Check the REMOTE CORD for damage;
		use a REMOTE CORD that has no
		damage.
	2.	Actuate and hold the REMOTE CONTROL.
	3.	Check that the voltage across the FOCUS
		MOTOR is 8.5 V AC. If the voltage is
		correct, install a new FOCUS MOTOR.
	Check that the secondary voltage on the MAIN
	MOTOR is correct.
No remote focus, RACK SOLENOID	1. Check that the REMOTE CORD operates
ASSEMBLY operates (Auto Focus Models)		correctly; use a REMOTE CORD you know
		is good (EC 3).
	2.	Actuate and hold the REMOTE CONTROL.
	3.	Check that the voltage across the FOCUS
		MOTOR is 8.5 V AC. If the voltage is
		correct, install a new FOCUS MOTOR.
	4.	Check the AUTO FOCUS SWITCH
		ASSEMBLY for correct operation.
	5.	Check the secondary voltages on the MAIN
		MOTOR.

SM4530-1 – 30APR96 51