Kodak J-E PLUS, KKE PLUS, KKA, JAMT, ATS, BR PIN Remote Control, PIN Special Applications, Ground

SERVICE MANUAL

	Item				Description
Auto Focus System				• After the initial focus adjustment, the auto-focus system will
					adjust for the difference in the slide position from slide to
					slide. This focus adjustment will occur within 1 second after
					the slide is inserted into the GATE.
				•	The focus adjustment variation should not change from the
					focus and reverse specifications by more than 3 times the
					focus and reverse specifications.
Reliability				The projector can operate for 2000 hours or 2,000,000 cycles.
				The projector has a MTBF (mean time between failures) of 7500
				operation hours.
Maintenance				Preventive maintenance by a qualified service person is
				recommended every 1500 hours of operation, or after 1 year.
Warranty				See the owner’s manual.
7-PIN REMOTE CONTROL				• PIN 1 - Black, REMOTE FOCUS
(See illustration below.)				• PIN 2 - Green, FORWARD TRAY CYCLE
				• PIN 3 - Orange, REVERSE TRAY CYCLE
				• PIN 4 - Brown, RACK SOLENOID
				• PIN 5 - Yellow, COMMON
				• PIN 6 - Brown, LAMP CONTROL
				• PIN 6 - White, LAMP CONTROL
9-PIN SPECIAL APPLICATIONS				• PINS 1 and 3 - ZERO POSITION SWITCH
(See illustration below.)				• PINS 4 and 5 - SHUTTER SWITCH
				• PINS 7 and 8 - LOW VOLTAGE SUPPLY, 25.5 V AC, 500
					mA, 1/2 Amp Maximum
				• PINS 6 and 8 - FORWARD TRAY CYCLE
				• PINS 2 and 8 - REVERSE TRAY CYCLE and SHELL PLUG
					GROUND
					SPECIAL APPLICATIONS PLUG
	24 V AC			7-PIN PLUG
24 V AC
		N			1	4
K
						2
	4	7	W
1					7
						5
	5 Y		82 V AC	Unloaded	6
2	3	6	N		8	3
G
		O
0 V AC	Common	24 V AC
A100_0023ACA					A100_0022ACA
A100_0023AA					A100_0022AA

42 30APR96 – SM4530-1