Replacements and Installations
Installing the WORM PULLEY and MECHANISM BELT
FAN BELT | MECHANISM BELT |
|
A091_4015BCA
A091_4015BA
Important
When installing the FAN and MECHANISM BELTS, install the MECHANISM BELT on the small MOTOR PULLEY, and the FAN BELT on the large MOTOR PULLEY.
[1]Do the replacement procedure for the WORM PULLEY and MECHANISM BELT in reverse order.
Replacing the THERMAL FUSE ASSEMBLY
Warning
Dangerous Voltage
[1]Disconnect the main power.
[2]Do the replacement procedure for the LOWER HOUSING ASSEMBLY.
[3]Cut and remove the necessary WIRE TIES.
[4]Remove the black wire from the THERMAL FUSE ASSEMBLY on the POWER SWITCH.
[5]Remove the gray wire from the THERMAL FUSE ASSEMBLY from the POWER CORD.
[6]Loosen the Torx SCREW on the PREHEAT DUCT approximately half way.
[7]Pull the THERMAL FUSE ASSEMBLY out of hole of the LOWER LIGHT BAFFLE ASSEMBLY.
9 |