Kodak JAMT, KKE PLUS, KKA, J-E PLUS, B, ATS Replacing the CAM Stack Assembly and Cycle Lever Assembly

Replacements and Installations

Replacing the CAM STACK ASSEMBLY and CYCLE LEVER ASSEMBLY

LIFT LEVER	LIFT LEVER
SHAFT

STYLE 1

RETARD

SPRING

E-RING

BEARING

STYLE 2

RETARD

SPRING

BEARING

	NUT	A008_0173HCA
	E-RING
CAM STACK ASSEMBLY		A008_0173HA

Warning

Dangerous Voltage

[1]Disconnect the main power.

[2]Do the replacement procedure for the MECHANISM ASSEMBLY.

[3]Remove the INDEXER LEVER ASSEMBLY from the TOP PLATE of the MECHANISM ASSEMBLY.

[4]Remove the Torx SCREW (on N.P. models) (or Hex SCREW on Painted Models) from the WORM PULLEY ASSEMBLY.

[5]Remove the WORM PULLEY ASSEMBLY.

[6]Remove the DIRECTION LEVER LINK from the DIRECTION LEVER.

[7]Remove the DIRECTION LEVER SPRING from the DIRECTION LEVER.

[8]Disconnect the LIFT LEVER SPRING from LIFT LEVER on the TOP PLATE of the MECHANISM ASSEMBLY.

[9]Remove the RETARD SPRING.

[10]Remove the 7 Torx SCREWS (on N.P. models) (or Hex SCREWS on Painted Models) from the TOP PLATE of the MECHANISM ASSEMBLY.

[11]Remove the TOP PLATE.

SM4530-1 – 30APR96 15