Kodak A-61555 manual Adjusting the input elevator, Selecting your feeding, Position

Adjusting the input elevator

Adjusting the side guides 1. Place the documents in the input elevator.

2.Adjust the side guides to fit the documents. The side guides should be far enough apart to accommodate the widest document that you are feeding.

Selecting your feeding	The side guides can be adjusted for right-edge, left-edge or center
position	feeding. The side guides can be moved together for center feeding or
	independently for offset feeding (right-edge or left-edge).
	When using the Enhanced Printer, documents should be placed in the
	input elevator in a manner that will align the print string in the proper
	location. Offset feeding may be required.
	If your stack of documents contain mixed sizes and has been left- or
	right-edge aligned, adjust the side guides for offset feeding.
Locking the side guides	Side guides may be locked into position after they are adjusted. This
	may be helpful when the placement of print strings is important.
	If you want to lock the side guides into position, move any documents
	which may be in the input tray and move the locking switch into the
	locked position.

A-61555 April 2009 3-5