Adjusting the height of the scanner
The workspace table can be raised approximately 25.4 cm (10 in.) from its lowest position for your comfort when you are sitting or standing at the scanner. When you are raising or lowering the workspace table, be sure that there is nothing close to the scanner that would interfere with the upward and downward movement (e.g., chair, table, etc.).
•Press the upper portion of the button on the control panel to raise to workspace table.
•Press the lower portion of the button on the control panel to lower the workspace table.
If the workspace table will not move up or down from its position, check the following:
•Be sure the front and/or rear access doors are securely closed.
•Be sure the workspace table is not already in its highest or lowest position.
•Be sure the scanner is on and is not in Power Saver mode.
|