Scanning
After enabling the scanner, depending on how your scanner is configured, your scanner will automatically start scanning, or you can touch the Scan button from the enabled screen. The following screen is displayed:
Using function keys when scanning
Scanning - Image Addressing - off Scanning - Image Addressing - on
NOTE: The options that appear on the screens above may be different depending on how your OCP function keys are set up.
The touchscreen displays functions that can be easily accessed. The order of these functions cannot be changed. The touchscreen will display the following:
Lower Elevator
Print Offset (if enabled)
Disable Print (if Print Offset is enabled)
Up to three additional functions may appear on the touchscreen when scanning. These functions are set up by the capture software application. Options which may also appear are:
•Omit patch
•Omit print
•Omit multifeed
•End batch
To select a function, touch the function you want to perform.
|