Fuse Replacement
1.Move the POWER SWITCH to the “OFF” position.
2.Disconnect the power cord and wait until the unit is completely cool.
3.Locate the fuse (see diagram). Use a screwdriver to remove the fuse cover, then remove the used fuse.
4.Install a new fuse with the correct rating. Replace the fuse cover.
Lamps | Fuse Rating | |
EYB, EHJ, EVD | 250Volt | 125Volt |
For 36V400w | T3.15A | T10A |
|
|
|
For 24V250w | T3.15A | T6.3A |
|
|
|
For 82V360w |
| T6.3A |
|
|
|
Lens and Glass Cleaning and Maintenance
Lens and Glass Cleaning and Maintenance
1.Clean the PROJECTION MIRROR, PROJECTION LENS, Fresnel lens (inside), and STAGE GLASS with a clean,
Note:
Fresnel lens is on inside of TOP COVER. Turn clips to remove. When replac- ing, make sure the “UP” label faces the STAGE GLASS side.
10KODAK EKTALITE E30/E31 OVERHEAD PROJECTORS