15 Press the ENTER AGE/WT button again and delete or add TV channels.
After all valid TV channels have been stored in the console’s memory, you can delete unwanted channels or add other channels. To delete or add
a channel, first press the CHANNEL + and – but- tons until the channel appears in the main display.
| Next, press the + or – button above the ENTER | |
| AGE/WT button until the words DELETE or ADD | |
| appear in the main display. Then, select the next | |
| channel that you want to delete or add. Repeat | |
| this process until you have finished deleting or | |
| adding channels. | |
| Hold down the ENTER AGE/WT button and the | |
16 | ||
RESET button simultaneously for two seconds | ||
|
to exit the maintenance mode.
To exit the maintenance mode at any time, hold down the ENTER AGE/WT button and the RESET button simultaneously for two seconds.
HOW TO RESET THE LUBE REMINDER
If the words LUBRICATE DECK appear in the main display when the maintenance mode is selected (refer to step 9 on page 24), follow the steps below to reset the lube reminder.
1 Insert the key into the console.
Refer to GETTING STARTED on page 14.
2 | Hold down the STOP button and the RESET |
button simultaneously for three seconds. |
25
