H OW TO

C ONNECT THE

T READMILL

HOW TO CONNECT THE POWER CORD

 

 

 

 

 

 

 

This product must be grounded.

 

 

 

 

If it should mal-

function or break down, grounding provides a path of

 

 

 

least resistance for electric current to reduce the risk

of electric shock.

Note: These instructions describe

how the power cord should be connected in the

 

 

 

UK, Germany, Italy, Spain, or France. To connect

 

 

 

the power cord in other countries, refer to the in-

 

 

 

struction sheet accompanying this manual.

 

 

 

 

 

 

 

 

 

 

 

DANGER:

 

 

Improper connection

of the equipment-grounding conductor can

 

 

 

result in an increased risk of electric shock.

 

 

 

Check with a qualified electrician or service-

 

 

 

man if you are in doubt as to whether the

 

 

 

product is properly grounded. Do not modify

 

 

 

the plug provided with the product—if it will

 

 

 

not fit the outlet, have a proper outlet

 

 

 

installed by a qualified electrician.

 

 

 

 

 

 

 

 

 

 

 

This product is for use on a dedicated circuit.

 

In the

UK, Germany, Italy, Spain, or France, use a dedi-

 

 

 

cated 10-amp, 240-volt circuit.

 

 

 

 

No other appliance

should be on the

 

 

 

 

 

 

 

 

 

same circuit. This

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

 

product is

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

equipped with a

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

cord having an

 

 

 

 

 

 

 

 

 

equipment-

 

 

 

 

 

 

 

 

 

grounding con-

 

 

 

 

 

 

 

 

 

ductor and a

 

 

 

 

 

 

 

 

 

grounding plug.

 

 

 

 

 

 

 

Bracket

 

 

 

 

Cord

Plug one end of

 

 

 

Bracket

 

 

Screws

 

the cord into the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

treadmill as

 

 

 

 

 

 

 

 

 

shown in drawing

 

 

 

 

 

 

 

 

 

1.Attach the cord bracket over the cord with two bracket screws.

Next, plug the grounding plug into a receptacle as shown in drawing 2 at the upper right. Do not modify the plug or the receptacle. Do not use an adapter, a surge protector, or an extension cord.

2

Germany

France

 

 

Spain

 

UK

Italy

HOW TO CONNECT A CATV CABLE

If your treadmill

 

has the Workout

 

TV console,

a

CATV cable must

 

be connected to

 

the treadmill for

 

cable TV stations

Cable Jack

to be viewed.

PAL Adapter

Locate the cable

 

jack on the front of

 

the treadmill.

 

Connect the CATV cable to the cable jack using the

PAL adapter.

 

A satellite receiver, VCR, or DVD player can also be connected to the treadmill. Connect a CATV cable from the coaxial output on your equipment (usually labeled TV OUT or RF OUT) to the cable jack on the front of the treadmill.

Note: Audio/video equipment without coaxial outputs

 

(some satellite receivers and DVD players) will require

 

an RF modulator to work correctly with the treadmill.

 

RF modulators are not available from Fr

eeMotion

Fitness, but are

available at electronics stores. See the

owner's manual for the equipment you wish to connect to determine if an RF modulator is needed.

10

Page 11
Image 11
NordicTrack 9600 user manual OW to Onnect, Improper connection, HOW to Connect a Catv Cable, TV console