Oki 1.2 manual Back Panel, Connectors

Page 11

Back Panel

Connectors

TEL

Connects a conventional

 

analogue telephone or G3

 

facsimile machine. Dial signal:

 

DTMF signaling only.

LINE

Connects to an analogue

 

public telephone line.

PC*

Connects to a PC via a straight

 

cable (category 3 or higher).

 

Not for Maintenance Console

 

Software. Use category 5 for

 

100BASE-TX.

LAN*

Connects to LAN via a cross

 

cable (category 3 or higher).

 

Use a straight cable for HUB

 

connection. Use category 5 for

 

100BASE-TX.

CONSOLE

Connects to a PC (serial port)

 

for data setup. Use an RS232C

 

connector cable (straight).

FG

Terminal strip for frame

 

ground.

DC IN 12V Connects an AC adapter.

*The communication performances of the LAN and PC ports are always the same and VoIP-TA conforms to the lower of the two. When either the PC or LAN port is 10 BASE-T, both ports are set to 10 BASE-T communication. If a PC is connected to the PC port during a call, the call may be interrupted for approximately one second. Please avoid such usage.

Outline 3

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Version Installation GuideSafety Warning Page Contents Important Equipment Information Setup VoIP-TA setting WindowImportant Safety Instructions Important Safety Instructions Welcome to the world of Oki Internet telephony… IntroductionVoIP-TA FeaturesOutline LEDs Front PanelBack Panel ConnectorsStatus When using both IP and PstnWhen using IP network only ModeAnalogue Pstn II InstallationConnections Analogue telephone or G3 facsimile equipmentPersonal computer PC Power sourceDuring use During installationGeneral Operation III Placing CallsVia an IP Network Third party incoming call during another call ServicesCall transfer during a telephone call End-to-end service using Dtmf signalingPlacing Calls How to cancel the absent service Absent serviceHow to register the absent service Third party incoming call during another call Details of ServicesUsing both a Pstn line and the IP network Line selectionFor Pstn line not receiving services using hookflash hooking Identification of incoming call Power failure switchingTranslating IP Address for VoIP Using the IP network onlySetting IP Address Maintenance Console Software Compatibility IV SetupMaintenance Console Software Requirements Installing the Maintenance Console SoftwarePassword, see Chapter V, Functions of the Maintenance Console SoftwareData Setup Procedure Mode FunctionActivating and Deactivating the Software’s Functions New connection window will appear Changing to the Setup mode Changing Modes and Setup ConditionsChanging setup conditions Saving all setup conditions in a file Reading information From the file For Pstn line Basic settings for Pstn lineDescriptions Default Select outgoing destination belowNeglect first Description DefaultSelect outgoing destination Select Use Pstn line, Use VoIP line or Unavailable to dialDailing IP address Number 1st Outgoing Neglect Digit Destination 1st digitDialed, excluding the first digit and 789 connects the call Number VoIP-TA operation DialedDialed, excluding the first digit and 901 connects the call Dialed, excluding the first digit and 567 connects the callDetailed settings for Pstn line Network settings UDP port No Specifies the UDP port number for communication Global address space Network Address Translation NATStatic IP Masquerade with port number translations To select Unicast GRQ or Multicast GRQ when Gatekeeper settingsBRQ DRQ GRQ Detailed Gatekeeper settingsAddress table display editing Sorting the list using each row as a key Sort with keyAddress table Setup Button see pages 42 DetailsDescription RTP/RTCP Voice settingsVoice codec Voice codec setting and bandwidth usedSetting ms Byte TCP/UDP FAX settingSlic setting Verifying the Software Version Information MaintenanceFunctions of the Maintenance Console Software Checking the Operation Status of the VoIP-TA Explanation of the displayed information Display Displayed contents DescriptionUpdating Unit Programs Changing the password Local mode VI TroubleshootingSymptom Items to check Remote modePort number VII SpecificationsUsage Important Equipment Information Following the warranty period Warranty and ServiceWarranty Period London Office Oki Service Offices

1.2 specifications

Oki 1.2 is an innovative product that reflects the ongoing evolution in technology intended for a diverse range of applications. This latest version builds on its predecessors by integrating advanced features and improvements that cater to user needs and enhance overall functionality.

One of the main features of Oki 1.2 is its user-friendly interface, designed to streamline the user experience. The intuitive design minimizes the learning curve for new users, allowing them to quickly navigate through various functions. This focus on usability is complemented by customizable settings, enabling users to tailor the platform according to their specific preferences and workflows.

The performance capabilities of Oki 1.2 have also been significantly enhanced. It incorporates cutting-edge processing technologies that ensure faster response times and increased efficiency. Users can expect smoother operation, making it suitable for both high-demand environments and everyday tasks. In addition, the processing power allows for multitasking, which is crucial for professionals operating in fast-paced settings.

Another standout characteristic of Oki 1.2 is its robust security features. With the prevalence of data breaches and cyber threats, Oki 1.2 addresses these concerns by implementing advanced encryption protocols and multi-layered security measures. Users can have peace of mind knowing that their sensitive information is protected on this platform.

Oki 1.2 also incorporates cloud integration capabilities, allowing for seamless data synchronization across devices. This feature enhances collaboration, enabling teams to work together in real time, regardless of their physical locations. The ability to access and share information effortlessly is a game-changer for organizations looking to improve productivity.

Furthermore, the product supports various file formats and applications, making it versatile for different industries. Whether in healthcare, education, or corporate environments, Oki 1.2 can adapt to meet a wide range of operational needs.

In conclusion, Oki 1.2 represents a significant advancement in the realm of technology applications. Its enhanced user interface, improved performance, robust security features, and cloud integration capabilities make it a powerful tool for users across multiple sectors. As technology continues to evolve, Oki 1.2 stands out as a reliable and efficient solution tailored to the demands of contemporary users.
Top Page Image Contents