Oki 1.2 manual UDP port No Specifies the UDP port number for communication

Page 39

Item	Descriptions	Default
Host name	Specifies the host name with 16 or fewer alphanumeric	VoIP-TA
	characters (single-byte). The specified host name is used
	as the individual name for VoIP-TA on the network.
Country code	No changes are necessary for this product version.	Germany (49)
MAC address	MAC address is displayed. No changes can be made	Specific address
	from this window.	for each unit.
TCP port No.	Specifies the TCP port number for receiving. 1720 is	1720
for receiving	normally used.
TCP port No.	Specifies the TCP port number for communication.	30000
	Entered values must be between 30000 (default) and 30099.
UDP port No.	Specifies the UDP port number for communication.	4998
Use DHCP	Activate when the IP address is obtained from a DHCP	Not used.
	server. Use the same IP address unless it has changed.
IP address	Specifies the IP address of the VoIP-TA.	255.255.255.255
Default gateway	Specifies the default gateway.	255.255.255.255
Subnet mask	Specifies the IP address of the subnet mask.	255.255.255.255
Use NAT	For using the NAT/IP Masquerade translation function.	Not used.
	Global address and port number offset are valid and
	effective only when this item has been checked.
Global address	Specifies the global IP address translated from the local IP	0.0.0.0
	address when the NAT/IP Masquerade translation function
	is in use.
Port No. offset	Used when the port number translation is enabled with
	static IP Masquerade.

•Please assign an IP address, default gateway, and subnet mask.

•Default values, set at the time of product shipping, are displayed when the Restore default button is clicked.

Setup 31

Image 39

Contents

Version Installation GuideSafety Warning Page Contents Important Equipment Information Setup VoIP-TA setting WindowImportant Safety Instructions Important Safety Instructions Welcome to the world of Oki Internet telephony… IntroductionFeatures OutlineVoIP-TA LEDs Front PanelBack Panel ConnectorsStatus When using both IP and PstnWhen using IP network only ModeAnalogue Pstn II InstallationConnections Analogue telephone or G3 facsimile equipmentPersonal computer PC Power sourceDuring use During installationIII Placing Calls Via an IP NetworkGeneral Operation Third party incoming call during another call ServicesCall transfer during a telephone call End-to-end service using Dtmf signalingPlacing Calls Absent service How to register the absent serviceHow to cancel the absent service Third party incoming call during another call Details of ServicesUsing both a Pstn line and the IP network Line selectionFor Pstn line not receiving services using hookflash hooking Identification of incoming call Power failure switchingUsing the IP network only Setting IP AddressTranslating IP Address for VoIP Maintenance Console Software Compatibility IV SetupMaintenance Console Software Requirements Installing the Maintenance Console SoftwarePassword, see Chapter V, Functions of the Maintenance Console SoftwareData Setup Procedure Mode FunctionActivating and Deactivating the Software’s Functions New connection window will appear Changing to the Setup mode Changing Modes and Setup ConditionsChanging setup conditions Saving all setup conditions in a file Reading information From the file For Pstn line Basic settings for Pstn lineDescriptions Default Select outgoing destination belowNeglect first Description DefaultSelect outgoing destination Select Use Pstn line, Use VoIP line or Unavailable to dialDailing IP address Number 1st Outgoing Neglect Digit Destination 1st digitDialed, excluding the first digit and 789 connects the call Number VoIP-TA operation DialedDialed, excluding the first digit and 901 connects the call Dialed, excluding the first digit and 567 connects the callDetailed settings for Pstn line Network settings UDP port No Specifies the UDP port number for communication Global address space Network Address Translation NATStatic IP Masquerade with port number translations To select Unicast GRQ or Multicast GRQ when Gatekeeper settingsBRQ DRQ GRQ Detailed Gatekeeper settingsSorting the list using each row as a key Sort with key Address tableAddress table display editing Setup Details DescriptionButton see pages 42 RTP/RTCP Voice settingsVoice codec setting and bandwidth used Setting ms ByteVoice codec TCP/UDP FAX settingSlic setting Maintenance Functions of the Maintenance Console SoftwareVerifying the Software Version Information Checking the Operation Status of the VoIP-TA Explanation of the displayed information Display Displayed contents DescriptionUpdating Unit Programs Changing the password Local mode VI TroubleshootingSymptom Items to check Remote modeVII Specifications UsagePort number Important Equipment Information Warranty and Service Warranty PeriodFollowing the warranty period London Office Oki Service Offices